http://qa.mandrakesoft.com/show_bug.cgi?id=2907


[EMAIL PROTECTED] changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|UNCONFIRMED                 |RESOLVED
         Resolution|                            |FIXED




------- Additional Comments From [EMAIL PROTECTED]  2003-02-07 21:11 -------
This one is due to the missing config_pdc_force in kernel... 
 
It's fixed on my bootdisks at www.iki.fi/tmb/9.1/ 
 
and MDK 9.1 update kernels and Cooker.... 

-- 
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.


------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: RESOLVED
creation_date: 
description: 
starting Installation of Mandrake 9.1RC2 from floppy, containing hd.img, only
one of my two IDE-disks is detected!
I have running Mandrake 9.0 succesfully on the same hardware and this problem
didn't occur here.
Mainboard:OEM ID: GIGABYTE Product ID: 7VRXP
the first disk is connected to the IDE-port, the second to the RAID, but set in
BIOS that it is treated like IDE.

this is an excerpt from dmesg (Mandrake 9.1 RC1):

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
        hda: SAMSUNG SV0602H, ATA DISK drive
        hda: DMA disabled
        blk: queue c039acc0, I/O limit 4095Mb (mask 0xffffffff)
        hdd: HITACHI CDR-7930, ATAPI CD/DVD-ROM drive
        hdd: DMA disabled
        ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
        ide1 at 0x170-0x177,0x376 on irq 15

-------------
this is the analogue part from dmesg on the running system Mandrake 9.0:

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
    ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:DMA, hdf:pio
        ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:pio, hdh:DMA
        hdc: SAMSUNG SV0602H, ATA DISK drive
        hde: SAMSUNG SV0602H, ATA DISK drive
        hdh: HITACHI CDR-7930, ATAPI CD/DVD-ROM drive
        ide1 at 0xdc00-0xdc07,0xd802 on irq 19
        ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
        ide3 at 0x170-0x177,0x376 on irq 15
        hdc: 117304992 sectors (60060 MB) w/2048KiB Cache, CHS=116374/16/63,
UDMA(100)
        hde: 117304992 sectors (60060 MB) w/2048KiB Cache, CHS=7301/255/63,
UDMA(100)
        Partition check

Reply via email to