Hello,
with the actual kernel, I can't use my IDE ZIP anymore, if I have a disk
in the ZIP at boot and hdb has ide-scsi, the machine don't even boot,
with ide-floppy, it boots, but when I try to mount it, it took ages to
have something on the console with MagicSysRq 8:
hdb lost interupt.
Here from dmesg:
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 17
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD200BB-75DEA0, ATA DISK drive
hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
blk: queue c07d6c60, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG CD-ROM SC-148C, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for SAMSUNG CD-ROM SC-148C
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=2431/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
hdb:<6>end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 1
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 3
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 5
end_request: I/O error, dev 03:40 (hdb), sector 6
end_request: I/O error, dev 03:40 (hdb), sector 7
end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 1
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 3
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 5
end_request: I/O error, dev 03:40 (hdb), sector 6
end_request: I/O error, dev 03:40 (hdb), sector 7
end_request: I/O error, dev 03:40 (hdb), sector 2147483640
end_request: I/O error, dev 03:40 (hdb), sector 2147483641
end_request: I/O error, dev 03:40 (hdb), sector 2147483642
end_request: I/O error, dev 03:40 (hdb), sector 2147483643
end_request: I/O error, dev 03:40 (hdb), sector 2147483644
end_request: I/O error, dev 03:40 (hdb), sector 2147483645
end_request: I/O error, dev 03:40 (hdb), sector 2147483640
end_request: I/O error, dev 03:40 (hdb), sector 2147483641
end_request: I/O error, dev 03:40 (hdb), sector 2147483642
end_request: I/O error, dev 03:40 (hdb), sector 2147483643
end_request: I/O error, dev 03:40 (hdb), sector 2147483644
end_request: I/O error, dev 03:40 (hdb), sector 2147483645
end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 6
end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 6
ldm_validate_partition_table(): Disk read failed.
end_request: I/O error, dev 03:40 (hdb), sector 0
end_request: I/O error, dev 03:40 (hdb), sector 2
end_request: I/O error, dev 03:40 (hdb), sector 4
end_request: I/O error, dev 03:40 (hdb), sector 6
unable to read partition table
That was with a ZIP in, with kernel 2.4.21-3mdk
Please CC to me as I am not on the ml ;-)
Gr�goire
__________________________________________________________________
http://www-ima.unil.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED]
