http://qa.mandrakesoft.com/show_bug.cgi?id=4551
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|UNCONFIRMED |ASSIGNED
Ever Confirmed| |1
Platform|PC |All
------- Additional Comments From [EMAIL PROTECTED] 2003-08-08 01:25 -------
The problem is that the new HPOJ has a diffwerent format for the URIs. The
"ptal:..." URI needs two slashes instead of one. Try
lpadmin -p HP3330 -E -v ptal://mlc:usb:HP_LaserJet_3330 -P
/usr/share/cups/model/HP-PostScript/hp_LaserJet_1300_series.ppd.gz
After entering this command you should be able to print. I will adapt Foomatic
and printerdrake to this.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: ASSIGNED
creation_date:
description:
In today's cooker, even after you run /etc/init.d/hpoj setup (see bug 4522),
CUPS will not be able to print to this device. The printer shows up as not
ready, and attempts to start it from CUPS fail immediately.
The pending job is a standard test page from MCC printerdrake.
The system is getting an error trying to read from the printer; details are in a
snippet of syslog which I will attach. This occurs when CUPS initializes, and
may be responsible for the later behavior.
I'll also attach an excerpt from /var/log/cups/error_log with Debug on, which
gives the trace from trying to print the testpage.
The same printer works correctly if the same machine is booted from a May 18
cooker system partition.
