-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Nathan A. Smith wanted us to know:

>Aug 15 21:19:36 NASA kernel: hub.c: new USB device 02:00.0-4, assigned
>address 4
>Aug 15 21:19:36 NASA kernel: scsi1 : SCSI emulation for USB Mass Storage
>devices
>Aug 15 21:19:36 NASA kernel:   Vendor: 256MB     Model:
>HardDrive         Rev: 1.88
>Aug 15 21:19:36 NASA kernel:   Type:  
>Direct-Access                      ANSI SCSI revision: 02
>Aug 15 21:19:36 NASA kernel: Attached scsi removable disk sdb at scsi1,
>channel 0, id 0, lun 0
>Aug 15 21:19:36 NASA kernel: SCSI device sdb: 512000 512-byte hdwr
>sectors (262 MB)
>Aug 15 21:19:36 NASA kernel: sdb: Write Protect is off
>Aug 15 21:19:36 NASA kernel:  /dev/scsi/host1/bus0/target0/lun0: p1
>Aug 15 21:19:39 NASA /etc/hotplug/usb.agent: Setup usb-storage for USB
>product ea0/6828/110
>Which all looks normal (and good), however, no desktop icon and I have
>to mount it manually...

Yes, it all looks good.  But mine has a couple of lines beyond that:

Aug 13 23:17:10 trip kernel: hub.c: new USB device 00:02.2-1.3, assigned
address
 3
Aug 13 23:17:10 trip kernel: usb.c: USB device 3 (vend/prod
0xea0/0x6803) is not
 claimed by any active driver.
Aug 13 23:17:13 trip /etc/hotplug/usb.agent: Setup usb-storage for USB
product e
a0/6803/100
Aug 13 23:17:13 trip kernel: Initializing USB Mass Storage driver...
Aug 13 23:17:13 trip kernel: usb.c: registered new driver usb-storage
Aug 13 23:17:13 trip kernel: scsi1 : SCSI emulation for USB Mass Storage
devices
Aug 13 23:17:13 trip kernel:   Vendor: Mobile    Model: Drive
Rev: 1
.11
Aug 13 23:17:13 trip kernel:   Type:   Direct-Access
ANSI S
CSI revision: 02
Aug 13 23:17:13 trip kernel: Attached scsi removable disk sda at scsi1,
channel
0, id 0, lun 0
Aug 13 23:17:13 trip kernel: SCSI device sda: 129024 512-byte hdwr
sectors (66 M
B)
Aug 13 23:17:13 trip kernel: sda: Write Protect is off
Aug 13 23:17:13 trip kernel:  /dev/scsi/host1/bus0/target0/lun0: p1
Aug 13 23:17:13 trip kernel: USB Mass Storage support registered.
Aug 13 23:17:14 trip /etc/hotplug/usb.agent: Module setup usb-storage
for USB pr
oduct ea0/6803/100
Aug 13 23:17:14 trip /etc/hotplug/usb/usb-storage: Load scsimon
Aug 13 23:17:14 trip /etc/hotplug/usb/usb-storage: loading ... scsimon
Aug 13 23:17:14 trip /etc/hotplug/scsi.agent: sd_mod allready loaded
Aug 13 23:17:14 trip /etc/hotplug/scsi.agent: sr_mod allready loaded


So figure out why mine is loading scsimon and you'll probably figure out
why yours isn't.  Good luck!
>
>Nasa
>
>> 
>> I don't know if any other desktop provides this as I don't normally run
>> anything other than KDE and IceWM (which doesn't have desktop icons).
>> - -- 
>> Blue skies...                Todd
>> | Get a bigger hammer!   | What does IIRC mean?                   |
>> | http://www.mrball.net  |               --OpenLDAP Mailing List  |
>> | http://faq.mrball.net  |                                        |
>> Linux kernel 2.4.21-0.25mdk   7 users,  load average: 0.00, 0.01, 0.16
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.2.2 (GNU/Linux)
>> Comment: http://www.mrball.net/todd.asc
>> 
>> iD8DBQE/PaB6IBT1264ScBURApwjAJ42BIqd7q9QnqS3AJxActab45xXLACfVO62
>> 51Et7z4lrBZf1/UplUe7lXM=
>> =pPUC
>> -----END PGP SIGNATURE-----
>> 

- -- 
Blue skies...           Todd
| Get a bigger hammer!   |  PPPoE: the internet for people who    |
| http://www.mrball.net  |  don't want the Internet.              |
| http://faq.mrball.net  |                       --Aaron Lehmann  |
Linux kernel 2.4.21-0.25mdk   6 users,  load average: 1.18, 0.79, 0.35
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: http://www.mrball.net/todd.asc

iD8DBQE/PaaKIBT1264ScBURAkqlAKCv8Ucwmd8VH3s3DoAcRIx32wglZQCghC3v
95CUI+uS4kxMiZXSPiv/5eY=
=+4ZD
-----END PGP SIGNATURE-----

Reply via email to