Hi my 9.2 Beta 2 System with Kernel 2.4.22.05 cant boot with my USB-Cam, after finding Moduls the System reboots. If the System running and i connect my Cam the System is rebooting too. Same with Kernel 2.4.21.6.
Aug 16 10:33:22 hitachi kernel: hub.c: new USB device 00:07.2-1, assigned address 2 Aug 16 10:33:22 hitachi kernel: usb.c: USB device 2 (vend/prod 0x471/0x307) is not claimed by any active driver. Aug 16 10:33:33 hitachi /etc/hotplug/usb.agent: Setup pwc for USB product 471/307/5 Aug 16 10:33:33 hitachi /etc/hotplug/usb.agent: Setup snd-usb-audio pwc audio for USB product 471/307/5 Aug 16 10:33:33 hitachi /etc/hotplug/usb.agent: Setup pwc for USB product 471/307/5 Aug 16 10:33:34 hitachi kernel: Linux video capture interface: v1.00 Aug 16 10:33:34 hitachi kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.10 loaded. Aug 16 10:33:34 hitachi kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, Aug 16 10:33:34 hitachi kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. Aug 16 10:33:34 hitachi kernel: usb.c: registered new driver Philips webcam Aug 16 10:33:34 hitachi kernel: pwc Philips PCVC675K (Vesta) USB webcam detected. Aug 16 10:33:34 hitachi kernel: pwc Registered as /dev/video0. Aug 16 10:33:34 hitachi insmod: insmod: a module named pwc already exists Aug 16 10:33:34 hitachi modprobe: modprobe: insmod /lib/modules/2.4.22-0.5mdk/kernel/drivers/usb/pwc.o.gz failed Aug 16 10:33:34 hitachi modprobe: modprobe: insmod pwc failed Aug 16 10:33:34 hitachi /etc/hotplug/usb.agent: ... can't load module pwc Aug 16 10:33:34 hitachi /etc/hotplug/usb.agent: missing kernel or user mode driver pwc Greetings Juergen
