http://qa.mandrakesoft.com/show_bug.cgi?id=5233
Product: Installation
Component: hardware
Summary: 9.2 RC1 hangs hard on a sony vaio z505
Product: Installation
Version: 1.829
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: hardware
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
Installation boots fine but averything stops right after the "Enabling PCMCIA
Extension Cards" on Alt-F1. One cannot switch VT's as the keyboard is unresponsive.
On Alt-F2, the blinking cursor disappears.
On Alt-F3, the last few lines are:
* CM: cardmgr/hacked starting, version is 3.1.29
* CM: watching 1 sockets
* CM: warning, Card Services release does not match kernel (generally harmless)
* CM: initializing socket 0
* CM: socket 0: Ninja ATA
* have to insmod ide-cs
* needs ide-cs
* succeeded ide-cs
* cardmgr rc: 0
* AUTOMATIC: parameter cdrom for method means returning CDROM drive
* have to insmod ide-cd
* needs cdrom
* needs ide-cd
On Alt-F4, the last few lines are:
<6>Linux Kernel Card Services Kernel Version
<6> options: [pci] [cardbus]
<6>PCI: Assigned IRQ 9 for device 00:0c.0
<6>PCI: Sharing IRQ 9 with 00:0a.0
<4>Yenta IRQ list 08b8, PCI irq9
<4>Socket status: 30000419
<6>cs: IO port probe 0x0c00-0x0cff: clean.
<6>cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x220-0x22f
0x330-0x337 0x370-0x37f 0x388-0x38f 0x398-0x39f 0x3e8-0x3ff 0x4d0-0x4d7
<6>cs: IO port probe 0x0a00-0x0aff: clean.
<6>cs: memory probe 0xa0000000-0xa0ffffff: clean.
<4>hde: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
<4>ide2 at 0x180-0x187,0x386 on irq 3
<6>ide_cs: hde: Vcc = 5.0, Vpp = 0.0
<4>hde: attached ide-cdrom driver.
This happens whether through rescue mode, or install/upgrade.
I had to reboot each time and switch to each vt as soon as I could to catch the
errors before the lockup.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
