http://qa.mandrakesoft.com/show_bug.cgi?id=1881
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Version|9.2-4mdk |9.2-8mdk
------- Additional Comments From [EMAIL PROTECTED] 2003-09-09 14:12 -------
Still present in 9.2RC2 drakxtools-9.2-9mdk
Still the same behaviour. I have an orinoco based pcmcia wireless card
installed.
I go through the drakconnect wizard filling in all the wireless parameters.
I click 'Finish' to exit the wizard. The card starts working and I can see
/etc/sysconfig/network-scripts/ifcfg-eth0 contains the wireless parameters.
I then click 'OK' to exit drakconnect and the card stops working and all the
wireless parameters have disappeared from
/etc/sysconfig/network-scripts/ifcfg-eth0
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: ASSIGNED
creation_date:
description:
9.1RC1
Example failure scenario :-
/etc/sysconfig/network-scripts/ifcfg-eth0 is set up for an pcmcia Ethernet card, but
the user is replacing the Ethernet card with a wireless card.
The user starts mcc and selects the networking GUI.
The user presses the 'Wizard' button and goes through drakconnect to set up the
wireless card parameters. On pressing 'Finish' to exit the wizard the new parameters
are used to set up the card, and it starts working.
The user then presses 'OK' in the networking GUI, and the original contents of
ifcfg-eth0 are then written back again and the card stops working.
The user has to exit the GUI with 'Cancel' in order to retain the modified contents of
ifcfg-eth0.
This is obviously not very intuitive.
