http://qa.mandrakesoft.com/show_bug.cgi?id=5641
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEEDINFO
------- Additional Comments From [EMAIL PROTECTED] 2003-15-09 17:30 -------
My mistake. After the lp0 errors, I also get:
ptal-mlcd: ERROR at ExMgr.cpp:3760, dev=<mlc:usb:[EMAIL PROTECTED]>, pid=4550,
e=16, t=1063624890
Couldn't claim interface=2!
ptal-mlcd: ERROR at ExMgr.cpp:2557, dev=<mlc:usb:[EMAIL PROTECTED]>, pid=4550,
e=16, t=1063624890
Couldn't set up MLC interface!
/usr/bin/ptal-devid: Failed to retrieve device ID string for device "mlc:usb:
probe"!
printers.conf contains invalid URI:
DeviceURI usb://Unknown
No entry is created in /etc/ptal
lsmod (with alsa stuff removed):
Module Size Used by Tainted: P
printer 8832 0
lp 8320 0
parport_pc 25608 1
parport 36392 1 [lp parport_pc]
sg 36092 0 (autoclean)
binfmt_misc 7308 1
sd_mod 13740 0 (autoclean) (unused)
ide-floppy 15808 0 (autoclean)
ide-tape 49456 0 (autoclean)
agpgart 49060 3 (autoclean)
nvidia 1766496 11 (autoclean)
af_packet 16232 1 (autoclean)
sr_mod 19480 0 (autoclean)
floppy 56444 0
8139too 17864 1 (autoclean)
mii 3932 0 (autoclean) [8139too]
supermount 83392 2 (autoclean)
ide-cd 33860 0
cdrom 33216 0 [sr_mod ide-cd]
tuner 11752 1 (autoclean)
bttv 101120 0
i2c-algo-bit 8488 0 [bttv]
i2c-core 20868 0 [tuner bttv i2c-algo-bit]
videodev 8096 2 [bttv]
ide-scsi 11312 0
scsi_mod 108992 4 [sg sd_mod sr_mod ide-scsi]
scanner 12224 0
ehci-hcd 19404 0 (unused)
usb-ohci 21608 0 (unused)
usbcore 78060 1 [printer scanner ehci-hcd usb-ohci]
rtc 9964 0 (autoclean)
ext3 62768 2
jbd 42248 2 [ext3]
Cannot print or scan
[EMAIL PROTECTED] austin]# service hpoj stop
Stopping the HP OfficeJet Linux driver.
[EMAIL PROTECTED] austin]# rmmod printer
[EMAIL PROTECTED] austin]# service hpoj start
Stopping the HP OfficeJet Linux driver.
Starting the HP OfficeJet Linux driver.
No hpoj devices have been configured.
As root, run "/etc/init.d/hpoj setup".
[EMAIL PROTECTED] austin]# lpinfo -v
network socket
network http
network ipp
network lpd
direct canon:/dev/lp0
direct epson:/dev/lp0
direct parallel:/dev/lp0
direct pdf
direct scsi
direct ptal
direct usb://Unknown
direct usb:/dev/usb/lp1
direct usb:/dev/usb/lp2
direct usb:/dev/usb/lp3
direct usb:/dev/usb/lp4
direct usb:/dev/usb/lp5
direct usb:/dev/usb/lp6
direct usb:/dev/usb/lp7
direct usb:/dev/usb/lp8
direct usb:/dev/usb/lp9
direct usb:/dev/usb/lp10
direct usb:/dev/usb/lp11
direct usb:/dev/usb/lp12
direct usb:/dev/usb/lp13
direct usb:/dev/usb/lp14
direct usb:/dev/usb/lp15
Cannot scan or print
[EMAIL PROTECTED] austin]# service cups restart
Stopping CUPS printing system: [ OK ]
Starting CUPS printing system: [ OK ]
[EMAIL PROTECTED] austin]# lpinfo -v
network socket
network http
network ipp
network lpd
direct canon:/dev/lp0
direct epson:/dev/lp0
direct parallel:/dev/lp0
direct pdf
direct scsi
direct ptal
direct usb:/dev/usblp0
direct usb:/dev/usblp1
direct usb:/dev/usblp2
direct usb:/dev/usblp3
direct usb:/dev/usblp4
direct usb:/dev/usblp5
direct usb:/dev/usblp6
direct usb:/dev/usblp7
direct usb:/dev/usblp8
direct usb:/dev/usblp9
direct usb:/dev/usblp10
direct usb:/dev/usblp11
direct usb:/dev/usblp12
direct usb:/dev/usblp13
direct usb:/dev/usblp14
direct usb:/dev/usblp15
[EMAIL PROTECTED] austin]# PTAL_DEBUG=255 scanimage -L
ptalInit(): debug level set to 255.
ptalInit()
ptalDeviceProbe: dev=<.>.
ptalDeviceOpen(.): missing colon!
ptalDeviceProbe: dev=<..>.
ptalDeviceOpen(..): missing colon!
ptalDeviceProbe: dev=<ptal-printd-like>.
ptalDeviceOpen(ptal-printd-like): missing colon!
hpoj: sane_hpoj_get_devices
device `v4l:/dev/video0' is a Noname BT878(ATI TV-Wonder VE) virtual device
hpoj: sane_hpoj_exit
ptalDone()
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: NEEDINFO
creation_date:
description:
I just added a HP PSC 1210 muti-funtion printer to my system. Every time I run
printerdrake, it adds another instance of that model to the list of printers.
So if I run it three times, I get a list of three HP PSC 1210's connected to my
system.
