http://qa.mandrakesoft.com/show_bug.cgi?id=5740
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Component|drakboot |printerdrake
------- Additional Comments From [EMAIL PROTECTED] 2003-16-09 18:13 -------
Please do the checks and try to follow the instructions in bug #5641. Your
problem is probably the same as described there.
Before you proceed as shown in bug #5641, please post your
/etc/cups/printers.conf and the output of
service hpoj restart
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: ASSIGNED
creation_date:
description:
With bugzilla, I choose scannerdrake and it shows drakxtools without the
scannerdrake module!
Scannerdrake says to use printerdrake for this USB Printer-Scanner. This bug
belongs perhaps to Printerdrake...
Printer works. The scanner is detected, an icon for xsane appears on the
Deskboard. But, xsane said "Pas de p�riph�rique disponible" (No scanner
available).
Another scanner Epson 1240U works fine.
Harddrake shows:
Vendeur: ?Hewlett-Packard
Description: ?psc 1200 series
Port: ?/dev/usb/scanner0
# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 007: ID 03f0:2f11 Hewlett-Packard
But sane-find-scanner said:
# you have loaded a SCSI driver for your SCSI adapter
