http://qa.mandrakesoft.com/show_bug.cgi?id=3062
------- Additional Comments From [EMAIL PROTECTED] 2003-17-09 04:12 ------- Hi Till, Here's /proc/bus/usb/devices: ---------------------------------------------------------------------------------------- T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.04 S: Manufacturer=Linux 2.4.21-0.13mdk ehci-hcd S: Product=Intel Corp. 82801DB USB EHCI Controller S: SerialNumber=00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ff40 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ff60 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=056a ProdID=0010 Rev= 1.11 S: Manufacturer=WACOM S: Product=ET-0405-UV1.1-1 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 40mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=wacom E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ff80 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=2911 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=PSC 2200 Series S: SerialNumber=MY266B10CQ0G C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=cc Prot=00 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 1 Alt= 0 #EPs= 3 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=10ms I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms ---------------------------------------------------------------------------------------- Here's /proc/scsi/scsi: ---------------------------------------------------------------------------------------- Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: SAMSUNG Model: CD-R/RW SW-240B Rev: BD11 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HP Model: psc 2210 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 ---------------------------------------------------------------------------------------- Here's /etc/fstab: ---------------------------------------------------------------------------------------- /dev/hda7 / reiserfs notail 1 1 none /dev/pts devpts mode=0620 0 0 none /mnt/cdrom supermount dev=/dev/hdc,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 none /mnt/cdrom2 supermount dev=/dev/scd0,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 none /mnt/floppy supermount dev=/dev/fd0,fs=ext2:vfat,--,sync,codepage=850,umask=0,iocharset=iso8859-1 0 0 /dev/hda5 /mnt/main reiserfs notail 1 2 /dev/hda2 /mnt/windows ntfs ro,umask=0,iocharset=iso8859-1 0 0 none /proc proc defaults 0 0 /dev/hda6 swap swap defaults 0 0 /dev/sda1 /mnt/removable auto user,umask=0,noauto,iocharset=iso8859-1,exec,codepage=850,kudzu 0 0 ---------------------------------------------------------------------------------------- I know a lot of that isn't related to the HP, but I thought I'd leave it in incase it might impact the way the PSC 2210 works in anyway. It is not automatically mounted, but it is mountable without issue. The "mdir p:" command works fine. I haven't tried the card directly connected in a long time, but since it is working alright through the PSC 2210 when I manually mount it (as well as being read by my Sharp Zaurus), I think its okay. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When I test my USB multifunction device (HP PSC 2210) with the usb-storage module, dynamic creates an icon on my KDE desktop in 9.0, but in 9.1 it does not. Let me know if you need any specific device information, but I'm fairly certain there aren't any detection problems, as the mount point is created, just not the icon.
