[Cooker] Xircom PCMCIA driver loading problem

[lamikr_mdk]

Has anybody problems with the PCMCIA network cards with the Mandrake 
cooker? Just tested with HP Omnibook 4150 with Xircom CE3 10/100 Fast 
Ethernet card. (Couple of year old 400 mhz model) and it appears that I 
need to set the ip address manually every time.

During the booting
  1) I will see messages repeated which will claim that there may be
  a IRQ conflict.
  2) There appears text that cardmanager have loaded the driver
  succesfully
  3) When I log in, the ip address is not set. I will always need to
  set it manually by using "ifconfig eth0 xxx netmask xxx" and
  "route add default gw xxx"
If I run drakconf it will recognice my card
  Vendor: Xircom CE3-10/100 Fast Ethernet
  Module: xirc2ps_cs
If I check dmesg there is following text repeated multible times.

        Linux Kernel Card Services Kernel Version
        options: [pci] [cardbus] [pm]
        ds: no socket driver loaded
        unloading kernel card services
        inux Kernel Card Services Kernel Version
        options: [pci] [cardbus] [pm]
        ds: no socket driver loaded
        unloading kernel card services
        ...
        PCI: found irq 10 for device 00:04.0
        PCI: Sharing irq 10 with 01:00.0
        ..
        ..
        eth0: Xircom port 0x300, irq 3, hwadddr xxx...
        eth0: autonegotiation failed, using 10 mbs
        eth0: MII selected
        eth0_ Media 10BaseT, silicon revision 4
Mika