http://qa.mandrakesoft.com/show_bug.cgi?id=5112
------- Additional Comments From [EMAIL PROTECTED] 2003-22-09 02:53 -------
On the other PC : Asus P4PE, chip "as99127f" , I have no problem.
The first time, I had :
fan1: 2265 RPM (min = 1500 RPM, div = 4) ALARM
After editing /etc/sensors.conf and reset of sensors, it works fine.
I have noticed that the output of sensors gives:
alarms:
beep_enable:
Sound alarm enabled
However I have heard no alarm the first time !
And there is no mention of alarms in /etc/sensors.conf or in documentation.
I guess that this is the problem on the other computer.
It should be better to package sensors with sound alarm disabled.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
When lm_sensors is launched, it makes the beeper sound continuously and loudly
at about 1000Hz. Only reboot can stop this awful sound.
Setup of /etc/sysconfig/lm_sensors :
# Generated by sensors-detect on Sat Aug 30 16:10:14 2003
MODULE_0=i2c-i801
MODULE_1=w83781d
MODULE_2=eeprom
Computer :
cpu : Intel(R) Pentium(R) 4 CPU 1500MHz
motherboard : ASUS P4T - Socket 423 - Chipset Intel 850
