http://qa.mandrakesoft.com/show_bug.cgi?id=5985

           Product: Installation
         Component: Installation
           Summary: install hangs after loading alt/alt.rdz.......
           Product: Installation
           Version: 1.847
          Platform: PC
        OS/Version: All
            Status: UNCONFIRMED
          Severity: blocker
          Priority: P1
         Component: Installation
        AssignedTo: [EMAIL PROTECTED]
        ReportedBy: [EMAIL PROTECTED]


Hi,   
   
I put the cd in old PII klamath pc and boot.   
Loading alt0   
loading alt/alt.rdz...................................................   
ready   
   
and the cursor keeps blinking.   
   
I used the same cd's to install it on a other pc no troubles there.   
The very strange thing is that a knoppix 3.2 cd works without problem!!   
   
Here's a extract from the dmesg from knoppix cd   
   
SCSI subsystem driver Revision: 1.00   
scsi0 : SCSI host adapter emulation for IDE ATAPI devices   
  Vendor: MITSUMI   Model: CD-ROM FX320M !B  Rev: m01G   
  Type:   CD-ROM                             ANSI SCSI revision: 02   
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0   
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray   
Uniform CD-ROM driver Revision: 3.12   
NET4: Linux TCP/IP 1.0 for NET4.0   

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8   
        <Adaptec 2940 Ultra SCSI adapter>   
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs   
   
  Vendor: IBM       Model: DDRS-39130W       Rev: S71D   
  Type:   Direct-Access                      ANSI SCSI revision: 02   
scsi1:A:2:0: Tagged Queuing enabled.  Depth 253   
Attached scsi disk sda at scsi1, channel 0, id 2, lun 0   
(scsi1:A:2): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)   
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)   
 sda: sda1   
NCR53c406a: no available ports found   
aec671x_detect:    
PCI: Enabling device 00:0f.0 (0116 -> 0117)   
PCI: Found IRQ 15 for device 00:0f.0   
scsi: <fdomain> Detection failed (no card)   
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)   
megaraid: no BIOS enabled.   
DC390: 0 adapters found   
Failed initialization of WD-7000 SCSI card!   
 
Kind regards   
Guy Forssman

-- 
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

Reply via email to