Hi,
Anybody is successful in getting pctel modem working with 9.2. I got
the drivers from http://linmodems.technion.ac.il/pctel-linux/ and
installed the drivers. My dialer (kppp and minicom) recognizes the
modem. Kppp starts dialling but i don't see any response. I can't hear
the sound also. Modem volume is set high (M1L3)
Any help to get this working will be appreciated.
--jaimon
Here are the details
Kernel 2.4.22-21mdk
lspci
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02)
(prog-if 00 [Generic])
Subsystem: PCTel Inc Dell Inspiron 2100 internal modem
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at d400 [size=256]
I/O ports at dc00 [size=128]
When I load the pctel and ptserial modules, my syslog reports
Nov 11 19:57:23 jjaimon-laptop kernel: AC97 modem device found: devnum =
8000FE00, devid = 8086/2486
Nov 11 19:57:23 jjaimon-laptop kernel: iobase_0=0xd400,
iobase_1=0xdc00,irq=11
Nov 11 19:57:23 jjaimon-laptop kernel: PCTel driver version 0.9.5
[5.05c-4.27.215 (09-14-2001)] (MR) (2002-01-31) with MANY_PORTS
SHARE_IRQ SERIAL_PCI AUDIO_ROUTING[INTEL] enabled.
Nov 11 19:57:23 jjaimon-laptop kernel: PCTel driver built on [Linux
2.4.22-21mdk i686 unknown "2.4.22-21mdkcustom <132118>"] with gcc-gcc
(GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk).
Nov 11 19:57:23 jjaimon-laptop kernel: ttyS15 at 0xd400 (irq = 11) is a
PCTel
Modem Commands ( using kppp)
ATZ
OK
ATM1L3
OK
ATDT1722226
If I use minicom, modem initialization doesn't return any error, but I
don't get the prompt.
