http://qa.mandrakesoft.com/show_bug.cgi?id=1253
------- Additional Comments From [EMAIL PROTECTED] 2003-08-29 18:26 ------- No activity has been seen on this bug since 20030203 and it is still in UNCONFIRMED state. This probably means that the information provided was not clear enough, or that the bug is not valid anymore. Please test and confirm that this bug is still valid with the latest cooker version, or close it. ------- Additional Comments From [EMAIL PROTECTED] 2003-11-12 22:52 ------- I have the same experience, asus a7v333 motherboard (also VIA usb controller). On Mandrake 9.1 the usb2.0 ports seem to perform fine, but after transferring considerable amounts of data (couple of 700MB files), it just stops. When the bios is set to usb legacy support, it stops much much earlier (after some 80MB or so). (I have the latest bios for this board, 1017, dating from May 2003.) I now tried on Mandrake 9.2 with the stock kernel and just now with the updated kernel, kernel-i686-up-4GB-2.4.22.21mdk. On both the behaviour is the same: very low throughput (seems usb1 speed, around 1MB/s or less), and cpu load goes to 94-100%. This is with an Athlon 2400+ cpu. On Mandrake 9.1 the cpu load would stay low for a bit, then gradually rise to 60-70% BTW hotplugging is working fine since 9.2; I don't get a desktop icon, but can just browse to /mnt/removable and all is there. This part works fine. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hi!... I am using Mandrake beta 2.0 and I have problem with USB 2.0.... I got mass storage device connected to USB 2.0 kontroler from VIA... USB Controller: VIA Technologies, Inc. USB 2.0 (rev 81). Mass storage device is hdd (20 gb IBM) in external case... It seems that everything is working ok, but when I start copying files to my usb hdd, load average goes up very quickly, and when it came to around 2.5 usb device stop responding. After that I cannot umount the device, I cannot reset or shutdown machine.... Kernel is 2.4.21-0.pre3.1mdk p.s. I had also problem like this with Mandrake 9.0, 9.1 beta 1...
