http://qa.mandrakesoft.com/show_bug.cgi?id=4731
------- Additional Comments From [EMAIL PROTECTED] 2003-11-15 17:48 ------- in diskdrake you can set umask=0 and the explanation clearly states that it will allow normal users to access the drives. The problem is that this should be default for ALL security levels under "�l�v�"/"high" as standard is the default one -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I've just installed Mandrake 9.2 beta 2 and win_c and win_e are not readable to a normal user, only root. Hereafter are fstab, mtab, ls -l /mnt cat /etc/fstab /dev/hda5 / ext3 defaults 1 1 none /dev/pts devpts mode=0620 0 0 none /mnt/cdrom supermount dev=/dev/hdb,fs=auto,ro,--,codepage=850,iocharset=iso8859-15 0 0 none /mnt/cdrom2 supermount dev=/dev/scd0,fs=auto,ro,--,codepage=850,iocharset=iso8859-15 0 0 /dev/hda10 /mnt/data_linux_hda10 ext2 defaults 1 2 /dev/hda9 /mnt/data_linux_hda9 ext2 defaults 1 2 /dev/hda8 /mnt/linux_Mdk91 ext3 defaults 1 1 /dev/hda1 /mnt/win_c vfat codepage=850,iocharset=iso8859-15 0 0 #/dev/hda5 /mnt/win_d ntfs iocharset=iso8859-15,ro,umask=0 0 0 /dev/hda6 /mnt/win_e ntfs ro,iocharset=iso8859-15 0 0 none /proc proc defaults 0 0 /dev/hda7 swap swap defaults 0 0 [EMAIL PROTECTED] baud]$ cat /etc/mtab /dev/ide/host0/bus0/target0/lun0/part5 / ext3 rw 0 0 none /proc proc rw 0 0 none /proc/bus/usb usbfs rw 0 0 none /dev devfs rw 0 0 none /dev/pts devpts rw,mode=0620 0 0 none /mnt/cdrom supermount ro,dev=/dev/hdb,fs=auto,--,codepage=850,iocharset=iso8859-15 0 0 none /mnt/cdrom2 supermount ro,dev=/dev/scd0,fs=auto,--,codepage=850,iocharset=iso8859-15 0 0 /dev/ide/host0/bus0/target0/lun0/part10 /mnt/data_linux_hda10 ext2 rw 0 0 /dev/ide/host0/bus0/target0/lun0/part9 /mnt/data_linux_hda9 ext2 rw 0 0 /dev/ide/host0/bus0/target0/lun0/part8 /mnt/linux_Mdk91 ext3 rw 0 0 /dev/ide/host0/bus0/target0/lun0/part1 /mnt/win_c vfat rw,codepage=850,iocharset=iso8859-15 0 0 /dev/ide/host0/bus0/target0/lun0/part6 /mnt/win_e ntfs ro,iocharset=iso8859-15 0 0 [EMAIL PROTECTED] baud]$ df -T Sys. de fich. Type Tail. Occ. Disp. %Occ. Mont� sur /dev/ide/host0/bus0/target0/lun0/part5 ext3 2,0G 1,8G 71M 97% / /dev/ide/host0/bus0/target0/lun0/part10 ext2 2,0G 8,0K 1,9G 1% /mnt/data_linux_hda10 /dev/ide/host0/bus0/target0/lun0/part9 ext2 4,0G 8,0K 3,8G 1% /mnt/data_linux_hda9 /dev/ide/host0/bus0/target0/lun0/part8 ext3 4,6G 3,9G 426M 91% /mnt/linux_Mdk91 /dev/ide/host0/bus0/target0/lun0/part1 vfat 20G 18G 2,2G 89% /mnt/win_c /dev/ide/host0/bus0/target0/lun0/part6 ntfs 4,9G 2,4G 2,6G 48% /mnt/win_e [EMAIL PROTECTED] baud]$ cd /mnt/win_e bash: cd: /mnt/win_e: Permission denied [EMAIL PROTECTED] baud]$ ls -l /mnt total 32 drwxrwxrwx 1 root root 0 ao� 13 21:01 cdrom/ drwxrwxrwx 1 root root 0 ao� 13 21:01 cdrom2/ drwxr-xr-x 3 root root 4096 ao� 9 01:51 data_linux_hda10/ drwxr-xr-x 3 root root 4096 ao� 9 01:51 data_linux_hda9/ drwxr-xr-x 18 root root 4096 ao� 13 20:55 linux_Mdk91/ drwxr--r-- 24 root root 16384 jan 1 1970 win_c/ dr-x------ 1 root root 4096 avr 13 21:57 win_e/ I had win_d before installing Mandrake 9.2, that's the part of my disk I partitionned in 3 (there were 8 GB => 4 + 2 + 2). I understand it for data_linux_hda9 (which I'll use as a data disk and change with appropriate rights) but it's not understandable for win_c and win_e, they should be at least readable for everyone and (at least) win_c writable by everyone (I used it as a data disk in Mandrake 9.1...). I had a problem with diskdrake as well but I'm going to open another bug as soon as I find some logs (those disks were planned and asked to be ext3 instead of ext2...)
