Hi,

here is my more detailed bug report (I used 7.2beta1). I was not able to use
the "bug" command on console 2, because this console was not active. So i
wrote the output text down (typos possible).

testing for /modules/ide-mod.o
not found /modules/ide-mod.o
try with /tmp/ide-mod.o

testing for /modules/ide-probe.o
not found /modules/ide-probe.o
try with /tmp/ide-probe.o

testing for /modules/ide-probe-mod.o
not found /modules/ide-probe-mod.o

testing for /modules/ide-mod.o
not found /ide-mod.o
try with /tmp/ide-mod.o
insmod: a module named ide-mod already exists

testing for /modules/cdrom.o
not found /modules/cdrom.o
try with /tmp/cdrom.o

testing for /modules/ide-cd.o
not found /modules/ide-cd.o
try with /tmp/ide-cd.o

(This was the point where the install program asks "do you have a SCSI
adapter?" - "yes")

testing for /modules/scsi-mod.o
not found /modules/scsi-mod.o
try with /tmp/scsi-mod.o

(i chose "dc385x_trm" and pressed autoprobe twice)

testing for /modules/dc395x_trm.o
not found /modules/dc395x_trm.o
try with /tmp/dc395x_trm.o

(the driver was successfully loaded, but "i could not mount a CD on device
/dev/scd0")

On console 3:
(after pressing "autoprobe" for the dc395x_trm driver):
* running: /bin/insmod /bin/insmod /modules/dc395x_trm.o
(then i have to press "autoprobe" again):
* running: /bin/insmod /bin/insmod /modules/dc395x_trm.o
Host: scsi0 Channel: 00 Id: 01 Lun: 00
   Vendor: Quantum Mo
* scsi devices are available
* mounting scd0 on /tmp/rhimage as type iso9660
* creating directory /tmp/rhimage rc = 0
* calling mount(/tmp/scd0, /tmp/rhimage, iso9660, -1058209791, (nil))


After pressing "ok" on console 1 (at the message "i could not ...")
an endless loop is printing this on console 3:

* PCI bridge probe:
* not found

* Intel PCIC probe:
* not found

* Databook PCIC probe:
* not found

* .....


Is it possible that the included version of the driver is not the newest?
I get some (10) messages at the end of the driver initialisation:

<6> DC395x: Sel Timeout IRQ

That was the same on SuSE 6.2 and worked ok. Since SuSE 6.4 this messages
disappeared.
The homepage of the driver is:

ftp://ftp.suse.com/pub/people/garloff/linux/dc395/index.html

Best regards,

   J�rgen.

Reply via email to