This night Pixel wrote me (his worlds....;o):
"i must have a look... promise, i'll do it..."
----- Original Message -----
From: "Franco Silvestro" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, September 14, 2000 2:00 AM
Subject: Re: [Cooker] pcmcia.img 20000913 19:18 - pcmcia 3c589_cs always not
configurable...
> Now I tried with hd.img in end of installation I have on console f1 same
> messages of first bug report "....failed umount some filesystems", may be
is
> important that on console f4 I see initial probing infos : after <30>
> messages of correct cardmgr probing on socket 1and insmoding of
> /modules/3c589_cs.o, correct <6> parameter messages (io, irq and hw_addr)
,
> there are some <30> cardmgr messages with :
> ...: executing : './network start eth0'
> ...: + ./network: /etc/sysconfig/network-script/ifup: not found
> ...: start cmd exited with status 2
> ...: exiting
>
> may be before with pcmcia.img were scrolled away....;o)
>
> P.S. Same problem with this 2.2.17-3 kernel as reported in other relative
> bug report (extract inserted) but this time I can't shutdown with CTRL ALT
> CANC and I've beautiful colored vertical lines....needed switch off...and
> long check on filesystem....;o/ (I use that time for write this
> report...;o)
>
> ----- Original Message -----
> From: "Franco Silvestro" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Cc: "Chmouel Boudjnah" <[EMAIL PROTECTED]>
> Sent: Wednesday, September 13, 2000 7:24 AM
> Subject: [Cooker] kernel-pcmcia-cs-2.2.17-2 Problem with frame buffer in
> last kernel
>
>
> > Synched from sunsite.uio.no 20000913 04:00 CEST
> > Fresh Install expert developer first time with all, second time with
slide
> at
> > minimum ....
> > With last kernel , soon at boot, it disappear screen , I need blindly
CTRL
> > ALT CANC when hd led stop blinking to shutdown
> [....]
>
> P.P.S. With precedent hackkernel (first time that I try it this afternoon
> ...awaiting your upgrades...;o) I can boot my laptop and also with XFree4
> and little modifies on XF86config-4 I can use my laptop 15.4" LCD (Samsung
> LTN154E1-L01) with correct 1280*1024 resolution and optimum speed....
gnome
> screensavers flies....;o)
>
> With Hackkernel KDE freeze in starting...;o/ ....but gnome works....;o) I
> had also problems with 3c589, but I stop testing when I've seen mirror
> mdkinst and kernel upgrading....;o)
>
> cu and good work ...I go sleep three o four hours....;o)
> --
> -
> Franco Silvestro
> c/o CeSIA - Universita' degli Studi di Bologna
>
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 14, 2000 11:29 AM
Subject: [Cooker] PCMCIA boot image
> Hi Guys,
>
> I have just tried to install the latest beta on a spare partition on my
> lap-top without any success. I created a boot floppy using the pcmcia.img
> file, so I can do a network install. It bootstraps okay, then fails to
> start any PCMCIA devices. The "Starting PCMCIA" banner appears followed
by
> two bleeps, the second one being a lower pitch.
>
> Any thoughts/comments?
>
> Alan G Dunkley
> Product Development Specialist
> RISC Control
> 16 North Street.
> Reading. Berks.
> RG1 7DA
>
> Phone: +44-(0)118-951-3003 (Switchboard)
> Phone: +44-(0)118-956-5723 (Desk)
> Fax: +44-(0)118-951-3005
> Mobile: +44-(0)7714-339039
> Email: [EMAIL PROTECTED]
>
>
>
