hi all,
Using last dowload, network.img as changed.. OK, testing..
1) On a proliant 3000 (Bi-proc PII at 45OMhz and 512Meg of Ram), I got
a strage error about memory... Not enough space for Initrd. Rebooting and
append "mem=512M" correct this.
2) In stage2, after chosing language, keyboard etc..., install detect my
SCSI's and complain for 'nvr53c8xx' modules, OK, that's normal, the two on
board controlers are disable, but surprise:
'Une erreur est survenue: aucun p�riph�rique valide n'a �t� trouv� pour cr�er
de nouvelles partitions. Veuillez v�rifier votre mat�riel. at
/usr/bin/perl-install/fsedit.pm line 418'
switching by CtrlAltF1:
Thu Feb 1 16:40:29 2001 Gdk-WARNING **: locale not supported by C library
at /usr/bin/perl-install/my_gtk.pm line 179
------- This text is scrolling permanently !!!
swintching by AltF2
DrakX v1.401 built Wed Jan 31 20:41:15 2001
switching by AltF3
* starting step 'doPartitionDisk'
* no scsi devices are avaible
* warning: Une erreur est survenue: aucun p�riph�rique.... (as below)
switching by AltF4
<6> cpqarray Finding drives on ida0 (SMART-2SL)
<6> cpqarray ida/c0d0: blksiz=512 nr_blks=8380320
<6> cpqarray ida/c0d1: blksiz=512 nr_blks=8380320
<6> cpqarray ida/c0d2: blksiz=512 nr_blks=17764320
<6> partitio check:
<6> ida/c0d0: p1 p2 p2 p4
<6> ida/c0d1: p1
<6> ida/c0d2: p1
<6> SCSI subsystem driver Revision 1.0
<6> ncr53c8xx: at PCI bus 2, device 4, function 0
<4> ncr53c8xx: I/O base address (0x1000) disabled
<4> ncr53c8xx: PCI_COMMAND_MEMORY not set
<6> ncr53c8xx: at PCI bus 2, device 4, function 1
<4> ncr53c8xx: I/O base address (0x1400) disabled
<4> ncr53c8xx: PCI_COMMAND_MEMORY not set
.... blabla, blabla,
<7> VFS: Disk change detected on device ide0(3,0)
That's all.... What I have to do now ?
MP
--
Michel PRILLOT
NetAdmin for Recif.
