Hiya,
I have 3COM PCI modem at home, works under 7.2 without additional hardware
Read http://www.cyest.org/tutorials/3compcimodem/
Prana
> If beta freeze is not a joke - what about this problem (several bug
> reports from several people?) Hardrake claims my modem is Winmodem
> 3COM 5610. I have no idea if 5610 is winmodem or not - but mine is
> 3CP2977, PCI hardware modem that has been on duty for several months.
>
> lspci -n:
> 02:0d.0 Class 0700: 12b9:1008 (rev 01)
>
> lspci -vv:
> 02:0d.0 Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev
> 01) (prog-if 02 [16550])
> Subsystem: US Robotics/3Com USR 56k Internal FAX Modem (Model
> 2977)
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at d000 [size=8]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
> PME(D0+,D1-,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>
> lspcidrake:
> unknown : US Robotics/3Com|56K FaxModem Model 5610
> [COMMUNICATION_SERIAL]
>
> dmesg:
>
> Serial driver version 5.02 (2000-08-09) with HUB-6 MANY_PORTS MULTIPORT
> SHARE_IRQ SERIAL_PCI ISAPNP enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> PCI: Found IRQ 9 for device 02:0d.0
> ttyS02 at port 0xd000 (irq = 9) is a 16550A
>
> Note, that it is kernel 2.4.2-3mdk; stock 7.2 came with old serial module
> that did not support PCI modems and when I compiled serial-5.05 it
> assigned ttyS4 and not ttyS2 (as was in readme, first 4 ports are reserved
> for legacy devices).
>
> -andrej
>
>
--
Prana <[EMAIL PROTECTED]>
http://www.cyest.org
My GnuPG Key ID: 0x33343FD3 (2000-07-21)
Key fingerprint = F1FB 1F76 8866 0F40 A801 D9DA 6BED 6641 3334 3FD3
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0x33343FD3
Sent through GMX FreeMail - http://www.gmx.net
