Hello,
I'm still having trouble with this application. I have Back-Graded FROM
xawtv 3.43-2mdk TO 3.21-3.mkd and still have much the same problem. Also: I
cannot find this command "cabletv" which package is it part of?
On Friday 27 April 2001 04:20, [EMAIL PROTECTED] wrote:
> I think is a video initialization problem. When I had the version
> comming with MDK 8,if before activate it I runec cabletv, that runed
> ever, xawtv runs fine, but if I tryed to run it before cabletv, the
> black screen as you.
>
> In other message I have sent a few minutes ago to the list, I commented
> that using the xawtv comming with MDK 7.2 runs; 8.0 not.
>
> Francisco Alcaraz
> Murcia (Spain)
>
> ----- Mensaje Original -----
> Remitente: "Charles A. Shirley" <[EMAIL PROTECTED]>
> Fecha: Viernes, Abril 27, 2001 5:54 am
> Asunto: Re: [Cooker] xawtv non functional
>
> > On Thursday 26 April 2001 23:44, you wrote:
> > > "Charles A. Shirley" <[EMAIL PROTECTED]> writes:
> > > > Hello Folks!,
> > > > I'm having trouble getting xawtv to function. I am using a
> >
> > Hauppauge> > WinTVGo (bt878) and an ATI Radeon 32DDR under XFree86-
> > 4.0.3. xawtv runs,
> >
> > > > and I get sound, but there is no picture, and there are error
> >
> > messages> > like so:
> > > > [chas@magnatron chas]# xawtv
> > > > This is xawtv-3.43, running on Linux/i686 (2.4.3-20mdksmp)
> > > > image format list for port 42
> > > > 0x32595559 (YUY2) packed
> > > > 0x59565955 (UYVY) packed
> > > > 0x32315659 (YV12) planar
> > > > 0x30323449 (I420) planar
> > > > Xv: using port 42 for hw scaling
> > > > x11: 1024x768, 32 bit/pixel, 4096 byte/scanline, DGA
> > > > v4l: 1024x768, 32 bit/pixel, 4096 byte/scanline
> > > > wmhooks: netwm
> > > > v4l: oops: got sigalarm
> > > > ioctl: VIDIOCSYNC(0): Interrupted system call
> > > > grab: no match for: 384x288 16 bit YUV 4:2:2 (packed)
> > > > ioctl: VIDIOCMCAPTURE(0,fmt=5,size=64x48): Device or resource busy
> > > > ioctl: VIDIOCMCAPTURE(0,fmt=4,size=64x48): Device or resource busy
> > > > ioctl: VIDIOCMCAPTURE(0,fmt=1,size=64x48): Device or resource busy
> > > > grab: no match for: 384x288 32 bit TrueColor (LE: bgr-)
> > > > grab: no match for: 384x288 16 bit YUV 4:2:2 (packed)
> > > > grab: no match for: 384x288 32 bit TrueColor (LE: bgr-)
> > >
> > > At which color depth are you ? Have you tried another one ?
> >
> > I have tried at 16 and at 24 bpp color depth, and I have tried
> > with and
> > without DGA enabled. And with and without the v4l module loaded
> > in the
> > /etc/X11/XF86Config-4 file. Each permutation so far has yielded
> > negative
> > results. HOWEVER: With the DGA disabled and the v4l moule
> > loaded, I did not
> > get the aforementioned errors, just the black window.
> >
> > Strangely: After a re-boot necessitated by a crash, changes made
> > to
> > /etc/X11/XF86Config-4 were lost. Go figure!
> >
> > -Charles
--
Charles A. Shirley, ENS USNR
[EMAIL PROTECTED]
http://physics.unr.edu/cshirley
