Chmouel Boudjnah wrote:
> Guillaume Cottenceau <[EMAIL PROTECTED]> writes:
>
> > Simon Hargreaves <[EMAIL PROTECTED]> writes:
> >
> > > Guillaume Cottenceau wrote:
> > >
> > > > Simon Hargreaves <[EMAIL PROTECTED]> writes:
> > > >
> > > > > On Mandrake 8.0, the default output for XMMS was the USB audio device
> > > > > and not the SBLive card that mandrake detected on install.
> > > >
> > > > The default is "sound-slot-0". See in your /etc/modules.conf and possibly
> > > > change the order of your two sound slots.
> > >
> > > Shouldn't the installation be able to figure out a decent order for sound
> > > devices so that slot-0 is the sound card not a non-existant USB device.
> >
> > It thinks it is existent.
>
> yes you have a usb audio speaker aren't you ? what is your
> /proc/bus/usb/devices ?
I've got a webcam plugged into it but no speakers.
As a side note does the kernel support a logitech quickcam? A search
seems to
find differing views on this.
/proc/usb/bus/devices ->
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1c00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=0850 Rev= 1.00
S: Product=Camera
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl= 16ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl= 1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl= 16ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=audio
I: If#= 2 Alt= 0 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
E: Ad=83(I) Atr=01(Isoc) MxPS= 100 Ivl= 1ms
