bor@localhost:/etc/sysconfig/network-scripts%> sudo apm --suspend
usb-uhci.c: interrupt, status 2, frame# 1
usb.c: USB device not accepting new address=3 (error=-110)
bor@localhost:/etc/sysconfig/network-scripts%> usb-uhci.c: ENXIO 80000480,
flags 0, urb c6cce2a0, burb c6cce320
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000480, flags 0, urb c6cce2a0, burb c6cce320
usb.c: error getting string descriptor 0 (error=-6)
I do not have any USB devices and cannot say if they continue to work
after resume. This is stock Mdk8 kernel without any modifications:
bor@localhost% uname -a
Linux localhost.localdomain 2.4.3-20mdk #1 Sun Apr 15 23:03:10 CEST 2001
i686 unknown
bor@localhost% lspci
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation: Unknown device 1131 (rev 02)
00:1e.0 PCI bridge: Intel Corporation: Unknown device 244e (rev 01)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 2440 (rev 01)
00:1f.1 IDE interface: Intel Corporation: Unknown device 244b (rev 01)
00:1f.2 USB Controller: Intel Corporation: Unknown device 2442 (rev 01)
00:1f.3 SMBus: Intel Corporation: Unknown device 2443 (rev 01)
00:1f.4 USB Controller: Intel Corporation: Unknown device 2444 (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev a1)
02:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev
08)
02:0a.1 Input device controller: Creative Labs SB Live! (rev 08)
02:0c.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood
Plus DVD
Decoder (rev 02)
02:0d.0 Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev
01)
bor@localhost% cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=b000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=058f ProdID=9254 Rev= 1.00
S: Manufacturer=ALCOR
S: Product=Generic USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=b400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
-andrej
