Hi
Version (rsync ftp.sunet.se)
Mandrake Linux Cooker-i586 20010731 20:25
/ChangeLog/1.524/Mon Jul 30 17:33:36 2001//
This installation is a repeat of my last install, as far as I can see, so if
you are not interested in a copy from my ddebug.log you can stop here.
Conf Network:
* starting step `configureNetwork'
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/via-rhine.o
* adding alias eth0 to via-rhine
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_pe
rl/5.6.1/MDK/Common/Globals.pm line 28.
* probed of class on device
* writing host information to /mnt/etc/hosts
* warning: Not an ARRAY reference at
/usr/bin/perl-install/network/netconnect.pm
line 178.
Summary:-> printer
* running: rmmod parport_pc
parport_pc: Device or resource busy
* running: rmmod lp
rmmod: module lp is not loaded
* running: rmmod parport_probe
rmmod: module parport_probe is not loaded
* running: rmmod parport
parport: Device or resource busy
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/lp.o
* missing module parport_probe
* running: rmmod parport_probe
rmmod: module parport_probe is not loaded
* running: ifup lo with root /mnt
Cannot open netlink socket: Address family not supported by protocol
modprobe: Can't open dependencies file /lib/modules/2.4.5-BOOT1/modules.dep
(No
such file or directory)
Device does not seem to be present, delaying lo initialization.
* running: /etc/rc.d/init.d/cups start with root /mnt
* exec of /etc/rc.d/init.d/cups start failed: No such file or directory
* running: foomatic-configure -s cups -n lp -c file:/dev/lp0 -p 61472 -d
pnm2ppa
-N DeskJet 710C -L home with root /mnt
Can't locate XML/Grove.pm in @INC (@INC contains:
/usr/lib/perl5/5.6.1/i386-linu
x /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux
/usr/lib/perl5/
site_perl/5.6.1 /usr/lib/perl5/site_perl .) at
/usr/lib/perl5/site_perl/5.6.1/Fo
omatic/DB.pm line 20.
BEGIN failed--compilation aborted at
/usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.
pm line 20.
Compilation failed in require at /usr/sbin/foomatic-configure line 14.
BEGIN failed--compilation aborted at /usr/sbin/foomatic-configure line 14.
* warning: foomatic-configure failed at /usr/bin/perl-install/printer.pm line
54
4.
* starting step `summary'
Bootdisk -> non bootable
* starting step `createBootdisk'
* to put in modules scsi_hostadapter, scsi_hostadapter1
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/loop.o
* running: mkbootdisk --noprompt --appendargs hdc=ide-scsi --device /dev/fd0
2.
4.7-1mdk with root /mnt
mount: fs type msdos not supported by kernel
mke2fs 1.21, 15-Jun-2001 for EXT2 FS 0.5b, 95/08/09
* step `createBootdisk' finished
* starting step `setupBootloader'
* to put in modules scsi_hostadapter, scsi_hostadapter1
* running: mkinitrd -f /boot/initrd-2.4.7-1mdk.img --ifneeded 2.4.7-1mdk with
ro
ot /mnt
mke2fs 1.21, 15-Jun-2001 for EXT2 FS 0.5b, 95/08/09
* running: mkinitrd -f /boot/initrd-2.2.19-15mdk.img --ifneeded 2.2.19-15mdk
wit
h root /mnt
* warning: mkinitrd failed at /usr/bin/perl-install/bootloader.pm line 74.
* running: mkinitrd -f /boot/initrd-2.2.19-15mdk.img --ifneeded 2.2.19-15mdk
wit
h root /mnt
* warning: mkinitrd failed at /usr/bin/perl-install/bootloader.pm line 74.
* running: mkinitrd -f /boot/initrd-2.2.19-15mdk.img --ifneeded 2.2.19-15mdk
wit
h root /mnt
* warning: mkinitrd failed at /usr/bin/perl-install/bootloader.pm line 74.
* warning: Died at /usr/bin/perl-install/any.pm line 220.
* running: keytab-lilo.pl > /boot/se-latin1.klt se-latin1 with root /mnt
Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Loading /usr/lib/kbd/keymaps/i386/qwerty/se-latin1.kmap.gz
* stage2 of lilo used is lilo-menu
* writing lilo config to /mnt/etc/lilo.conf
gpm not started from boot.
regards
guran
