Hi VERSION (rsync(8.0) ftp.uninett.no) /ChangeLog/1.555/Mon Aug 27 22:41:46 2001// Mandrake Linux Cooker-i586 20010828 13:04 Install went fine by itself, but when I returned I had: An error ocurred, but I don't know how to handle it nicely. Continue at your own risk. From report.bug: * step `installPackages' finished * running: dumpkeys > /etc/sysconfig/console/default.kmap with root /mnt * running: dumpkeys > /etc/sysconfig/console/default.kmap with root /mnt * warning: can't open /mnt/dev/mouse for reading: No such file or directory Can't stat /usr/share/applnk-mdk: No such file or directory * running: dumpkeys > /etc/sysconfig/console/default.kmap with root /mnt * starting step `setRootPassword' Printer in the very last step 'foomatic-configure failed as before. Frpm report.bug * running: /etc/rc.d/init.d/cups start with root /mnt Starting CUPS printing system: [ OK ] * running: rmmod parport_pc * running: rmmod lp rmmod: module lp is not loaded * running: rmmod parport_probe rmmod: module parport_probe is not loaded * running: rmmod parport * running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/parport.o * running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/parport_pc.o * running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/lp.o * missing module parport_probe * running: rmmod parport_probe rmmod: module parport_probe is not loaded * running: ifup lo with root /mnt Cannot open netlink socket: Address family not supported by protocol modprobe: Can't open dependencies file /lib/modules/2.4.8-10mdkBOOT/modules.dep (No such file or directory) * running: /etc/rc.d/init.d/cups start with root /mnt Starting CUPS printing system: [ OK ] * running: foomatic-configure -s cups -n lp -c file:/dev/lp0 -p 61472 -d pnm2ppa -N DeskJet 710C -L home -o PageSize=A4 -o PrintingMode=ColorNormal -o Blackness=2 -o BottomMargin=150 -o DisableColorCorrection=0 -o LeftMargin=10 -o pnmFormat=PixMap -o PrinterModel=DJ710C -o RightMargin=10 -o TopMargin=10 -o Unidirectional=0 -o XOffset=160 -o YOffset=50 with root /mnt lpadmin: Unable to connect to server: Network is unreachable Could not set up/change the queue "lp"! * warning: foomatic-configure failed at /usr/bin/perl-install/printer.pm line 677. * starting step `summary' Xwindow still recognices only 4 MB videoram from ddcxinfos but I am running 1600x1200 at 24 bits from 'show all' regards guran -- Mandrake 8.1 beta kernel 2.4.8-12 - 1.555
