cooker installed two days ago with alternate network image, partition table
not understanded by DrakX "...continue at your own risk" ...it seem worked
ok with kernel22 but obviously(?) crash with kernel 2.4.8... (not created
entries in /dev/ida/
I tried rebuild kernel2.4.8.16 with integrated cpqarray and I need do manual
changes in /etc/fstab because now I see during boot problem after mounting
root partition as /dev/ida/c0d0p6 of not founding other partitions "if are
really ext2 partitions try with e2fsck..." and I see in management mode that
entries under /dev/ida are changed... :
kernel22 (/dev/ida/c0d0,/dev/ida/c0d0p1.....)
kernel2.4.8 (/dev/ida/disk0/disk,/dev/ida/disk0/part1....)
------------------------------------------------------------------------------
Now lilo that worked with kernel22 not work with recompiled kernel :
[root@cruncher cooker]# lilo -v
LILO version 21.7-5, Copyright (C) 1992-1998 Werner Almesberger
Linux Real Mode Interface library Copyright (C) 1998 Josh Vanderhoof
Development beyond version 21 Copyright (C) 1999-2001 John Coffman
Released 06-May-2001 and compiled at 17:29:46 on Aug 5 2001.
Reading boot sector from /dev/ida/c0d0
Fatal: open /dev/ida/c0d0: No such file or directory
--------------------------------------
but also :
--------------------------------------
[root@cruncher etc]# lilo -v
LILO version 21.7-5, Copyright (C) 1992-1998 Werner Almesberger
Linux Real Mode Interface library Copyright (C) 1998 Josh Vanderhoof
Development beyond version 21 Copyright (C) 1999-2001 John Coffman
Released 06-May-2001 and compiled at 17:29:46 on Aug 5 2001.
Reading boot sector from /dev/ida/disk0/disk
Fatal: open /dev/ida/disk0/disk: No such file or directory
--------------------------------------------------------------------------------
If you want I can do tests for this problems... we have here at univ. many
new Compaq Proliant DL360 with SmartArray on rack...with W2K ...without these
install problems... I can suggest to put some with LM....;o)
Also old ~gc/hd.img use old dev entries... stage1 works but stage2
don't......as reported...;o)
I send also last network.img report.bug
Mandrake Linux Cooker-i586 20010904 8:33
* second stage install running (DrakX v1.563 built Mon Sep 3 20:23:16 2001)
cu....;o)
--------------------working fstab for kernel22
[root@cruncher floppy]# cat fstab.22
/dev/ida/c0d0p6 / ext2 defaults 1 1
/dev/ida/c0d0p1 /boot ext2 defaults 1 2
none /dev/pts devpts mode=0620 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hdc /mnt/cdrom auto
user,iocharset=iso8859-1,umask=0,exec,codepage=850,ro,noauto 0 0
/dev/fd0 /mnt/floppy auto
user,iocharset=iso8859-1,umask=0,sync,exec,codepage=850,noauto 0 0
none /proc proc defaults 0 0
/dev/ida/c0d0p7 /temp ext2 defaults 1 2
/dev/ida/c0d0p5 swap swap defaults 0 0
---------------------------------------------------------------------------------
--------------------working fstab for rebuilded kernel2.4.8-16
[root@cruncher floppy]# cat fstab.24
/dev/ida/disc0/part6 / ext2 defaults 1 1
/dev/ida/disc0/part1 /boot ext2 defaults 1 2
none /dev/pts devpts mode=0620 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hdc /mnt/cdrom auto
user,iocharset=iso8859-1,umask=0,exec,codepage=850,ro,noauto 0 0
/dev/fd0 /mnt/floppy auto
user,iocharset=iso8859-1,umask=0,sync,exec,codepage=850,noauto 0 0
none /proc proc defaults 0 0
/dev/ida/disc0/part7 /temp ext2 defaults 1 2
/dev/ida/disc0/part5 swap swap defaults 0 0
---------------------------------------------------------------------------------
-
Franco Silvestro - Universita' di Bologna
Linux Version 2.4.8-16mdk, Compiled #6 SMP Mon Sep 3 13:31:42 CEST 2001
Two 997MHz Intel Pentium III Processors, 511M RAM, 3978.03 Bogomips Total
Uptime 0 hours 59 minutes
cruncher.alma.unibo.it
********************************************************************************
* lspci
********************************************************************************
unknown : Relience Computer|CNB20HE [BRIDGE_HOST]
unknown : Relience Computer|CNB20HE [BRIDGE_HOST]
cpqarray : Symbios|53c1510 Array Mode [Compaq Integrated Smart Array]
[STORAGE_RAID] SubVendor=0x0e11 SubDevice=0x4040
Card:ATI Mach64 3D RAGE II: ATI|3D Rage IIC 215IIC [Mach64 GT IIC] [DISPLAY_VGA]
unknown : Compaq|Advanced System Management Controller [SYSTEM_OTHER]
SubVendor=0x0e11 SubDevice=0xb0f3
unknown : ServerWorks|OSB4 [BRIDGE_ISA]
unknown : Vendor=0x1166 Device=0x0211 [STORAGE_IDE]
eepro100 : Intel Corporation|82559 [Ethernet Pro 100] [NETWORK_ETHERNET]
SubVendor=0x0e11 SubDevice=0xb134
eepro100 : Intel Corporation|82559 [Ethernet Pro 100] [NETWORK_ETHERNET]
SubVendor=0x0e11 SubDevice=0xb134
********************************************************************************
* pci_devices
********************************************************************************
0000 11660009 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
00000000
0001 11660009 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
00000000
0008 10000010 3 00002001 c5000000 c4000000
00000000 00000000 00000000 00000000 00000100
01000000 01000000 00000000 00000000 00000000
00080000
0018 10024756 0 c2000008 00002401 c3fff000
00000000 00000000 00000000 00000000 01000000
00000100 00001000 00000000 00000000 00000000
00020000
0020 0e11a0f0 0 00001801 c3ffef00 00000000
00000000 00000000 00000000 00000000 00000100
00000100 00000000 00000000 00000000 00000000
00000000
0078 11660200 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000
00000000
0079 11660211 0 00000000 00000000 00000000
00000000 00002801 00000000 00000000 00000000
00000000 00000000 00000000 00000010 00000000
00000000
0320 80861229 5 c6fff000 00003001 c6e00000
00000000 00000000 00000000 00000000 00001000
00000040 00100000 00000000 00000000 00000000
00100000 eepro100
0328 80861229 7 c6dff000 00003041 c6c00000
00000000 00000000 00000000 00000000 00001000
00000040 00100000 00000000 00000000 00000000
00100000 eepro100
********************************************************************************
* fdisk
********************************************************************************
********************************************************************************
* scsi
********************************************************************************
Attached devices: none
********************************************************************************
* lsmod
********************************************************************************
vfat 8816 1
fat 28352 0 [vfat]
parport 21056 0
sd_mod 10304 0 (unused)
scsi_mod 47680 1 [sd_mod]
cpqarray 16368 0 (unused)
ide-cd 25952 0
cdrom 28672 0 [ide-cd]
serial 65920 0
af_packet 8076 0 (unused)
eepro100 17832 1
********************************************************************************
* cmdline
********************************************************************************
ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 expert vga=788 BOOT_IMAGE=vmlinuz
mem=512M
********************************************************************************
* pcmcia: stab
********************************************************************************
********************************************************************************
* usb
********************************************************************************
********************************************************************************
* partitions
********************************************************************************
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use
aveq
72 0 71122560 ida/c0d0 0 0 0 0 0 0 0 0 0 0 0
72 1 509984 ida/c0d0p1 0 0 0 0 0 0 0 0 0 0 0
72 2 1 ida/c0d0p2 0 0 0 0 0 0 0 0 0 0 0
72 5 252944 ida/c0d0p5 0 0 0 0 0 0 0 0 0 0 0
72 6 5556944 ida/c0d0p6 0 0 0 0 0 0 0 0 0 0 0
72 7 64802624 ida/c0d0p7 0 0 0 0 0 0 0 0 0 0 0
********************************************************************************
* cpuinfo
********************************************************************************
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 996.910
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse
bogomips : 1985.74
********************************************************************************
* syslog
********************************************************************************
] kernel/system logger ok
<4>Linux version 2.4.8-10mdkBOOT ([EMAIL PROTECTED]) (gcc version 2.96
20000731 (Mandrake Linux 8.1 2.96-0.61mdk)) #1 Tue Aug 21 20:16:17 CEST 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
<4> BIOS-e820: 000000001fffc000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<4>On node 0 totalpages: 131072
<4>zone(0): 4096 pages.
<4>zone(1): 126976 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 expert
vga=788 BOOT_IMAGE=vmlinuz mem=512M
<6>Initializing CPU#0
<4>Detected 996.910 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 1985.74 BogoMIPS
<4>Memory: 513208k/524288k available (756k kernel code, 10692k reserved, 200k data,
92k init, 0k highmem)
<4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Intel Pentium III (Coppermine) stepping 06
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>POSIX conformance testing by UNIFIX
<4>PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=3
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<4>PCI: Discovered peer bus 03
<4>PCI: Device 00:00 not found by BIOS
<4>PCI: Device 00:01 not found by BIOS
<4>PCI: Device 00:78 not found by BIOS
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Starting kswapd v1.8
<6>vesafb: framebuffer at 0xc2000000, mapped to 0xe0800000, size 4096k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=3
<6>vesafb: protected mode interface info at c000:48f5
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<4>Console: switching to colour frame buffer device 100x37
<6>fb0: VESA VGA frame buffer device
<4>block: queued sectors max/low 341032kB/209960kB, 1024 slots per queue
<4>RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
<4>ServerWorks OSB4: chipset revision 0
<4>ServerWorks OSB4: not 100% native mode: will probe irqs later
<4> ide0: BM-DMA at 0x2800-0x2807, BIOS settings: hda:pio, hdb:pio
<4> ide1: BM-DMA at 0x2808-0x280f, BIOS settings: hdc:pio, hdd:pio
<4>hdc: Compaq CRN-8241B, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP: Hash tables configured (established 131072 bind 65536)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing................................done.
<4>Freeing initrd memory: 662k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
<4>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<[EMAIL PROTECTED]> and others
<6>eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:8A:00:58, I/O at 0x3000, IRQ 5.
<6> Receiver lock-up bug exists -- enabling work-around.
<6> Board assembly 727095-002, Physical connectors present: RJ45
<6> Primary interface chip i82555 PHY #1.
<6> General self-test: passed.
<6> Serial sub-system self-test: passed.
<6> Internal registers self-test: passed.
<6> ROM checksum self-test: passed (0x04f4518b).
<6> Receiver lock-up workaround activated.
<6>eth1: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:8A:00:57, I/O at 0x3040, IRQ 7.
<6> Receiver lock-up bug exists -- enabling work-around.
<6> Board assembly 727095-002, Physical connectors present: RJ45
<6> Primary interface chip i82555 PHY #1.
<6> General self-test: passed.
<6> Serial sub-system self-test: passed.
<6> Internal registers self-test: passed.
<6> ROM checksum self-test: passed (0x04f4518b).
<6> Receiver lock-up workaround activated.
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<4>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
<6>Uniform CD-ROM driver Revision: 3.12
<7>cpqarray: Device 0x1000 has been found at bus 0 dev 1 func 0
<4>Compaq SMART2 Driver (v 2.4.5)
<4>Found 1 controller(s)
<6>cpqarray: Finding drives on ida0 (Integrated Array)
<6>cpqarray ida/c0d0: blksz=512 nr_blks=142245120
<7>cpqarray: Starting firmware's background processing
<6>Partition check:
<6> ida/c0d0: p1 p2 < p5 p6 p7 >
<6>SCSI subsystem driver Revision: 1.00
<7>Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
<7>SMSC Super-IO detection, now testing Ports 2F0, 370 ...
<4>imm: Version 2.05 (for Linux 2.4.0)
<4>imm: parport reports no devices.
<7>Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
<7>SMSC Super-IO detection, now testing Ports 2F0, 370 ...
<4>ppa: Version 2.07 (for Linux 2.4.x)
<4>ppa: parport reports no devices.
********************************************************************************
* ddcxinfos
********************************************************************************
4096KB of video ram
256 640 400
256 640 480
32768 640 480
65536 640 480
16777216 640 480
256 800 600
32768 800 600
65536 800 600
16777216 800 600
256 1024 768
32768 1024 768
65536 1024 768
16777216 1024 768
256 1280 1024
32768 1280 1024
65536 1280 1024
16777216 1280 1024
32768 320 200
65536 320 200
16777216 320 200
32-60
57-85
16.41 inches monitor (truly 15.20')
# 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 1024x768, 87.0iHz
********************************************************************************
* ddebug.log
********************************************************************************
* second stage install running (DrakX v1.563 built Mon Sep 3 20:23:16 2001)
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/serial.o
* warning: rm of /usr/share/locale failed: No such file or directory
* warning: rm of /usr/share/locale_special failed: No such file or directory
* getFile Mandrake/mdkinst/usr/share/locale_special/en/LC_MESSAGES/libDrakX.mo:
* FTP: 550 file unavailable
* errorOpeningFile Mandrake/mdkinst/usr/share/locale_special/en/LC_MESSAGES/libDrakX.mo
* getFile VERSION:
* Trying with server FBDev
* found /tmp/network
* found network config file /tmp/ifcfg-eth0
* found network config file /etc/resolv.conf
* starting step `selectLanguage'
* getFile Mandrake/mdkinst/usr/share/locale_special/en/LC_MESSAGES/libDrakX.mo:
* FTP: 550 file unavailable
* errorOpeningFile Mandrake/mdkinst/usr/share/locale_special/en/LC_MESSAGES/libDrakX.mo
* selectLanguage: pack_langs en_US:en
* loading keymap us
* running: xmodmap /tmp/xmodmap.us
* step `selectLanguage' finished
* starting step `selectInstallClass'
* default cancel_clicked
* step `selectInstallClass' finished
* starting step `setupSCSI'
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/cdrom.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/ide-cd.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/cpqarray.o
* adding alias scsi_hostadapter to cpqarray
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/scsi_mod.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/sd_mod.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/parport.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/parport_pc.o
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters
* warning: insmod'ing module parport_pc failed at /usr/bin/perl-install/modules.pm
line 594.
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/imm.o
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters
* warning: insmod'ing module imm failed at /usr/bin/perl-install/modules.pm line 594.
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/parport_pc.o
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters
* warning: insmod'ing module parport_pc failed at /usr/bin/perl-install/modules.pm
line 594.
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/ppa.o
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters
* warning: insmod'ing module ppa failed at /usr/bin/perl-install/modules.pm line 594.
* step `setupSCSI' finished
* starting step `doPartitionDisks'
* warning: An error has occurred - no valid devices were found on which to create new
filesystems. Please check your hardware for the cause of this problem at
/usr/bin/perl-install/fsedit.pm line 663.
********************************************************************************
* install.log
********************************************************************************
********************************************************************************
* fstab
********************************************************************************
********************************************************************************
* auto_inst
********************************************************************************
#!/usr/bin/perl -cw
#
# You should check the syntax of this file before using it in an auto-install.
# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
# (note the '#!/usr/bin/perl -cw' on the first line).
$o = {
'partitions' => [],
'superuser' => {},
'users' => [],
'default_packages' => [],
'partitioning' => {
'auto_allocate' => '1'
},
'autoExitInstall' => '1'
};
