Hi
VERSION (rsync ftp.sunet.se)
/ChangeLog/1.572/Mon Sep 10 10:51:30 2001//
Mandrake Linux Cooker-i586 20010910 18:22
My second hard disk was shown among partitions, when choosing which one to
format - ALTHOUGH IT WAS NOT MOUNTED BY ME!
Here is what was in grub menu.1st:
title dos
root (hd1,0)
map (0x81) (0x80)
map (0x80) (0x81)
makeactive
chainloade +1
This is a dos deposit for AtheOS, and there is no fine root there it is in
(hd1,1) but this is formatted in afs, and Linux can't read it.
Printer installation gave up in the very last step, even in 1.570, after
printing testpage allright, and I acknowledge OK, the Summary ends with a
blank button for printer. This is from report.bug:
* running: /etc/rc.d/init.d/cups start with root /mnt
Loopback device ("lo", 127.0.0.1) needed by CUPS, starting it ...
Adding loopback device to routing table ...
lpd: unrecognized service
Starting CUPS printing system: [ OK ]
* running: rmmod parport_pc
parport_pc: Device or resource busy
* running: rmmod lp
rmmod: module lp is not loaded
* running: rmmod parport_probe
rmmod: module parport_probe is not loaded
* running: rmmod parport
parport: Device or resource busy
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/lp.o
* missing module parport_probe
* running: rmmod parport_probe
rmmod: module parport_probe is not loaded
* running: ifconfig lo 127.0.0.1 with root /mnt
* running: /etc/rc.d/init.d/cups start with root /mnt
lpd: unrecognized service
Starting CUPS printing system: [ OK ]
* running: foomatic-configure -s cups -n Printer -c file:/dev/lp0 -p 61472 -d
pnm2ppa -N DeskJet 710C -L home -o PageSize=A4 -o PrintingMode=ColorNormal -o
Blackness=2 -o BottomMargin=150 -o DisableColorCorrection=0 -o LeftMargin=10
-o pnmFormat=PixMap -o PrinterModel=DJ710C -o RightMargin=10 -o TopMargin=10
-o Unidirectional=0 -o XOffset=160 -o YOffset=50 with root /mnt
* running: foomatic-printjob -s cups -C up Printer with root /mnt
* running: foomatic-configure -D -s cups -n Printer with root /mnt
* running: /usr/bin/foomatic-printjob -s cups -P Printer
/usr/share/printer-testpages/testprint.ps with root /mnt
* selecting packages
* all packages selected are already installed, nothing to do
* step `summary' finished
Booting from both bootdisk and hard drive, the last without ramdisk, nice.
Kudzu still fails, takes for ever and gives a sour face from hard disk boot.
When using bootdisk kudzu blanks the whole screen but starts to write again
at the right position.
Installed NVIDIA and got FlightGear but with no sound. Why does libGL.so
still exist in /usr/X11R6/lib when NVIDIA fixes the open source variety in
/usr/lib. Does this mean that some programs are forced by Mdk behavior or
still use this shit? As far as I know RedHat and SuSe doesn't do that.
This probably results in the blackening in the middle of the NVIDIA screen.
regards
guran
--
Mandrake Linux 8.1 beta Cooker kernel-2.4.8-21 vers:1.572
