Peter Ruskin wrote:
>
> On Sunday 30 September 2001 21:50, Greg Sarsons wrote:
> > Peter Ruskin wrote:
> > > On Sunday 30 September 2001 21:09, Tim McKenzie wrote:
> > > > > I'm getting the same thing. In demo I see the temp and the fan in
> > > > > with the CPU info. Interesting, if I enable the fan pluging I get
> > > > > nothing additional. Enabling or disabling the plugins causes seg
> > > > > faults at times. Not sure what is causing it.
> > > > >
> > > > > BTW I'm using an ABIT KT7-Raid motherboard with an AMD Thunderbird
> > > > > 800.
> > > > >
> > > > > Greg
> > > >
> > > > I get the same on an Asus board... No info and occasional segfaults.
> > > > Other than that, I'd have to say 8.1 is great. I've already corrupted
> > > > several Windows users. ;) I might try hunting down the source for the
> > > > plugin and try recompiling it later...
> > > >
> > > > Tim
> > >
> > > You have to have lm-utils installed, then run sensors-detect as root.
> > > Once you have sensors detected and configured, reboot, then right-click
> > > on gkrellm and configure.
> >
> > Unfortunately, that is what I did. Installed lm_utils, then ran
> > sensors-detect and tried to configure gkrellm. No fan, no nothing. Now
> > again try it as -demo and it works. Unfortunately, I can't save the
> > data so every time I restart I have to config gkrellm.
> >
> > Greg
>
> I don't understand that. When you run sensors in a console, does that
> display the values? If not, look at /etc/sensors.conf (I think it's
> called).
> --
hmmm ... nope the values are not there. Then where is the fan speed and
temp gkrellm is getting while in demo mode coming from.
Greg
max1617-i2c-0-18
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
temp: +0�C (min = +4�C, max = +0�C)
remote_temp:
+0�C (min = +0�C, max = +60�C)ALARM (N/A)
eeprom-i2c-0-51
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 256
eeprom-i2c-0-52
Adapter: SMBus vt82c596 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 256
