Le Mardi 2 Octobre 2001 14:37, Damien Sainmont scribit : > About the problem with the folder /dev/video, I see that you don't make any > modification: it's always a folder!!!!
how come ! [root@bastard RealPlayer9]# ls -l /dev/video* lr-xr-xr-x 1 root root 10 sep 29 01:59 /dev/video -> v4l/video0 lr-xr-xr-x 1 root root 10 sep 29 01:59 /dev/video0 -> v4l/video0 mine is not a folder but a symlink and I use devfs > Why? Because some software use /dev/video as a link: ln -s /de/video0 > /dev/video this symlink have been done by default for me. did you have dynamic installed ? > Which software? KWINTV > You always propose xawtv but this soft is not the best and have a problem > in fullscreen SECAM mode (green line) neither have I. But this green line pb is known and normally have been fixed since a long time ... are you sure concerning your freqtab ? I attach my .xawtv > Why don't you propose by default KWINTV software? > Kwintv works with QT2 and KDE2.2.1. > Because, perhaps you don't know that there are some new versions (after the > last german one 0.8.5): I never manage to have real fullscreen with it ;) > Other thing: there is a problem with 8.1 MDK and the detection of the BTTV > card: > All the drivers are ok but the module.conf is not OK: the tuner is not > recognize correctlly > > You have to add the following sentences (I found only the first and second > line with you autodetection;it's not enough): > > alias char-major-81 bttv > pre-install bttv modprobe -k tuner > options tuner type =3 not sure. usually the autoprobe works fine. For me ( France, cable, WinTV PCI ) it works fine without any customisation. from dmesg : bttv: driver version 0.7.72 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0c.0 PCI: Sharing IRQ 11 with 00:0c.1 bttv0: Bt878 (rev 17) at 00:0c.0, irq: 11, latency: 32, memory: 0xd7000000 bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10 + autodetect the Hauppauge WinTV ( 10 ) bttv0: model: BT878(Hauppauge new (bt878)) [autodetected] bttv0: Hauppauge msp34xx: reset line init i2c-core.o: adapter bt848 #0 registered as adapter 0. + the same for the tuner ( 3 ) bttv0: Hauppauge eeprom: model=61326, tuner=Philips FI1216MF MK2 (3), radio=no bttv0: i2c: checking for MSP34xx @ 0x80... found but it's true that we may have the ability to fine tune this if autodetect failed via harddrake : select the right card, select the right tuner and harddrake edit modules.conf to pass the right options. -- http://perso.wanadoo.fr/linux_wizard/index.html - Je crois ce que je dis, je fais ce que je crois. -- Victor Hugo
[global] freqtab = europe-west pixsize = 128 x 96 pixcols = 1 jpeg-quality = 75 mjpeg-quality = 50 keypad-ntsc = no osd = yes fullscreen = 640x480 wm-off-by = +0+0 mixer = mic ratio = 4:3 # [Station name] # capture = overlay | grabdisplay | on | off # input = Television | Composite1 | S-Video | ... # norm = PAL | NTSC | SECAM | ... # channel = # # fine = # (-128..+127) # key = keysym | modifier+keysym # color = # # bright = # # hue = # # contrast = # [defaults] norm = secam input = Television capture = over color = 25% [TF1] channel = 52 key = F1 [France 2] channel = 57 key = F2 [France 3] channel = 50 key = F3 fine = +2 [CANAL+] channel = 55 key = F4 fine = +2 [Arte/La 5] channel = 60 key = F5 [M6] channel = 63 key = F6 [TMC] channel = 27 key = F7 fine = +2 [RTL9] channel = E12 fine = +27 [AB1] channel = E10 fine = +85 key = F8 [LCI] channel = SE13 fine = +32 [EURONEWS/SWISS TXT] channel = 24 fine = +2 [TV5] channel = 47 fine = +2 [Mosaique] channel = 65 fine = +3 [VCR] source = svideo norm = secam key = F9 [VCR Pal] source = svideo norm = pal key = F10
