Here you go - Socket 0: product info: "Xircom", "CardBus Ethernet 10/100 + Modem 56", "CBEM56G", "1.03" manfid: 0x0105, 0x0103 function: 6 (network) Socket 1: no product info available
I have to manually run DHCPD everytime - for some strange reason. But the card works. Robert On Thu, 2001-11-29 at 11:42, Chmouel Boudjnah wrote: > [EMAIL PROTECTED] (Robert Fox) writes: > > > On Wed, 2001-11-28 at 10:49, Chmouel Boudjnah wrote: > > > [EMAIL PROTECTED] (Robert Fox) writes: > > > > > > > The card is a PCMCIA Type III - Xircom Realport cardbus (Ethernet, > > > > modem/isdn) combination (RBEM 10/100). > > > > > > is it possible to do an install (eg: with cd or hd) and tell me if at > > > reboot it works ? > > > > > > > Chmouel, > > > > I copied the entire (2.4 gig) Cooker to the notebook and tried and install from >the latest hd.img > > > > Result: Installed fine but did not find the PC-CARD during install, but after >reboot the card was there, > > but I had to manually (using Draknet) configure the DHCP client for eth0 - the >card was enabled but NO IP > > addressed during reboot. > > what output of cardct ident ? >
