I got other problems now - most seriously, there appears to be a problem
with the LS120 floppy on the notebook under the latest Cooker (drive is
fine)
Attached are the dmesg, syslog and messages text.
As for the Lilo problem, I went under advanced and added a manual entry
for the 2.4.16 kernel and it worked under the install.
Cheers,
R.Fox
On Wed, 2001-12-05 at 15:41, Guillaume Cottenceau wrote:
> [EMAIL PROTECTED] (Robert Fox) writes:
>
> > Using the latest again (05.12.01)
> >
> > It still doesn't sutomaticall select the xircom_cb module, I have to
> > select it manually - and the network config works fine now . . .
> >
> > But now, I get a bootloader install failure:
> >
> > fatal: No images have been defined or default image doesn't exist
> >
> > kernel log states:
> >
> > * Installing boot loader
> > * running: lilo 2> /tmp/.error with root /mnt
> > * warning: lilo failed
> > * warning: lilo failed
> > * warning: already displayed at
> > /usr/bin/perl_install/install_steps_interactive.pm line 1155
>
> Can you check the /mnt/tmp/.error or try to run lilo by hand to see what's
> going on?
>
>
> --
> Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
>
Dec 4 16:26:44 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Dec 4 16:26:44 localhost kernel: FAT: unable to read boot sector
Dec 4 16:26:44 localhost kernel: FAT: freeing iocharset=iso8859-1
Dec 4 16:26:57 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Dec 4 16:27:22 localhost last message repeated 2 times
Dec 4 16:27:22 localhost kernel: MSDOS FS: IO charset iso8859-1
Dec 4 16:27:22 localhost kernel: MSDOS FS: Using codepage 850
Dec 4 16:27:35 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Dec 4 16:27:35 localhost kernel: FAT: unable to read boot sector
Dec 4 16:27:35 localhost kernel: FAT: freeing iocharset=iso8859-1
Dec 4 16:27:09 localhost login[1821]: FAILED LOGIN 1 FROM (null) FOR su,
Authentication failure
Dec 4 16:27:09 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Dec 4 16:27:12 localhost login(pam_unix)[1821]: session opened for user root by
LOGIN(uid=0)
Dec 4 16:27:12 localhost -- root[1821]: ROOT LOGIN ON tty1
Dec 4 16:27:22 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Dec 4 16:27:22 localhost kernel: MSDOS FS: IO charset iso8859-1
Dec 4 16:27:22 localhost kernel: MSDOS FS: Using codepage 850
Dec 4 16:27:35 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Dec 4 16:27:35 localhost kernel: FAT: unable to read boot sector
Dec 4 16:27:35 localhost kernel: FAT: freeing iocharset=iso8859-1
Linux version 2.4.16.3mdk-1-1mdksmp ([EMAIL PROTECTED]) (gcc version 2.96
20000731 (Mandrake Linux 8.2 2.96-0.68mdk)) #1 SMP Tue Dec 4 20:33:28 CET 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f1218 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000013ffbc00 (usable)
BIOS-e820: 0000000013ffbc00 - 0000000013fffc00 (ACPI data)
BIOS-e820: 0000000013fffc00 - 0000000014000000 (ACPI NVS)
BIOS-e820: 00000000ffff1218 - 0000000100000000 (reserved)
hm, page 00001000 reserved twice.
On node 0 totalpages: 81915
zone(0): 4096 pages.
zone(1): 77819 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Kernel command line: BOOT_IMAGE=linux ro root=306
Initializing CPU#0
Detected 400.012 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 797.90 BogoMIPS
Memory: 319648k/327660k available (1200k kernel code, 7624k reserved, 445k data, 264k
init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU0: Intel Mobile Pentium II stepping 0a
per-CPU timeslice cutoff: 730.25 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf4b1d, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15)
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v0.120 (20011103) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MHN2200AT, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8171, ATAPI CD/DVD-ROM drive
hdd: LS-120 SLIM 05 UHD Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63, UDMA(33)
hdc: ATAPI 20X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: No disk in drive
hdd: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing......done.
Freeing initrd memory: 111k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 264k freed
Real Time Clock Driver v1.10e
Adding Swap: 361420k swap-space (priority -1)
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0
hdd: No disk in drive
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
end_request: I/O error, dev 02:00 (floppy), sector 0
FAT: unable to read boot sector
FAT: freeing iocharset=iso8859-1
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.268 $ time 20:59:04 Dec 4 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xfce0, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.268:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x5fe/0x11) is not claimed by any active driver.
usb.c: registered new driver usb_mouse
input0: Cypress Sem. PS2/USB Browser Combo Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
Linux Kernel Card Services Kernel Version
options: [pci] [cardbus] [pm]
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000020
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000006
cs: cb_alloc(bus 2): vendor 0x115d, device 0x0003
PCI: Enabling device 02:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 02:00.0 to 64
eth0: Xircom cardbus revision 3 at irq 9
PCI: Enabling device 02:00.1 (0000 -> 0003)
ttyS04 at port 0x4080 (irq = 9) is a 16550A
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x398-0x39f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Crystal 4280/46xx + AC97 Audio, version 1.28.32, 20:56:42 Dec 4 2001
cs46xx: Card found at 0xffe00000 and 0xffd00000, IRQ 9
cs46xx: Unknown card (107B:8016) at 0xffe00000/0xffd00000, IRQ 9
ac97_codec: AC97 Audio codec, id: 0x4352:0x5903 (Cirrus Logic CS4297)
CS461x PCI: ffe00000[8192]
gameport0: CS461x Gameport speed 1529 kHz
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB Universal Host Controller Interface driver v1.1
xircom cardbus adaptor found, registering as eth0, using irq 9
xircom_cb: Link status has changed
xircom_cb: Link is 100 mbit
spurious 8259A interrupt: IRQ7.
ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0
hdd: No disk in drive
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
end_request: I/O error, dev 02:00 (floppy), sector 0
FAT: unable to read boot sector
FAT: freeing iocharset=iso8859-1
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid field in command packet -- (asc=0x24, ascq=0x00)
The failed "Start/Stop Unit" packet command was:
"1b 00 00 00 03 00 00 00 00 00 00 00 "
cdrom: open failed.
ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0
hdd: No disk in drive
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
end_request: I/O error, dev 02:00 (floppy), sector 0
FAT: unable to read boot sector
FAT: freeing iocharset=iso8859-1
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid field in command packet -- (asc=0x24, ascq=0x00)
The failed "Start/Stop Unit" packet command was:
"1b 00 00 00 03 00 00 00 00 00 00 00 "
cdrom: open failed.
ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0
hdd: No disk in drive
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0
hdd: No disk in drive
end_request: I/O error, dev 02:00 (floppy), sector 0
FAT: unable to read boot sector
FAT: freeing iocharset=iso8859-1
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
end_request: I/O error, dev 02:00 (floppy), sector 0
FAT: unable to read boot sector
FAT: freeing iocharset=iso8859-1
