Linux version 2.4.17-16mdk (quintela@bi.mandrakesoft.com) (gcc version 2.96 20000731 (Mandrake Linux 8.2 2.96-0.74mdk)) #1 Fri Feb 8 16:00:03 CET 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f1218 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000013ffbc00 (usable)
 BIOS-e820: 0000000013ffbc00 - 0000000013fffc00 (ACPI data)
 BIOS-e820: 0000000013fffc00 - 0000000014000000 (ACPI NVS)
 BIOS-e820: 00000000ffff1218 - 0000000100000000 (reserved)
hm, page 13ffb000 reserved twice.
On node 0 totalpages: 81915
zone(0): 4096 pages.
zone(1): 77819 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Kernel command line: BOOT_IMAGE=linux ro root=306 devfs=mount
Initializing CPU#0
Detected 400.012 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 797.90 BogoMIPS
Memory: 319952k/327660k available (1160k kernel code, 7320k reserved, 330k data, 256k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Mobile Pentium II stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf4b1d, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MHN2200AT, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8171, ATAPI CD/DVD-ROM drive
hdd: LS-120 SLIM 05 UHD Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=2432/255/63, UDMA(33)
hdc: ATAPI 20X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: No disk in drive
hdd: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing.......done.
Freeing initrd memory: 129k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 256k freed
Adding Swap: 361420k swap-space (priority -1)
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:23:42 Feb  8 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xfce0, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x5fe/0x11) is not claimed by any active driver.
usb.c: registered new driver usb_mouse
input0: Cypress Sem. PS2/USB Browser Combo Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
Linux Kernel Card Services Kernel Version
  options:  [pci] [cardbus] [pm]
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000020
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000006
cs: cb_alloc(bus 2): vendor 0x115d, device 0x0003
PCI: Enabling device 02:00.0 (0000 -> 0003)
PCI: Enabling device 02:00.1 (0000 -> 0003)
ttyS04 at port 0x4080 (irq = 9) is a 16550A
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x398-0x39f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
xircom_tulip_cb.c derived from tulip.c:v0.91 4/14/99 becker@scyld.com
 unofficial 2.4.x kernel port, version 0.91+LK1.1, October 11, 2001
PCI: Setting latency timer of device 02:00.0 to 64
eth0: Xircom Cardbus Adapter rev 3 at 0x4000, 00:10:A4:FE:83:D5, IRQ 9.
eth0:  MII transceiver #0 config 3100 status 7809 advertising 01e1.
CS461x PCI: ffe00000[8192]
gameport0: CS461x Gameport speed 1529 kHz
cs46xx: Unable to detect valid cs46xx device
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB Universal Host Controller Interface driver v1.1
cs46xx: Unable to detect valid cs46xx device
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: compatibility mode
lp0: compatibility mode
lp0: compatibility mode
SCSI subsystem driver Revision: 1.00
