Ah ha ! There's a problem here that I had overlooked ! My card is detected as "ATI|Rage Mobility M3 AGP 2x" but it doesn't work with the r128 drivers. It has to use the good old "ati" driver. Is this why 3D accelleration is not present ?
The output from lspcidrake is : agpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge unknown : LuxSonor Inc.|LS242 MPEG/DVD video decoder yenta_socket : Texas Instruments|PCI1220 CardBus Controller yenta_socket : Texas Instruments|PCI1220 CardBus Controller unknown : Intel Corporation|82371AB PIIX4 ISA unknown : Intel Corporation|82371AB PIIX4 IDE usb-uhci : Intel Corporation|82371AB PIIX4 USB sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller maestro : ESS Technology|ES1968 Maestro 2 Card:ATI Rage Mobility: ATI|Rage Mobility P/M AGP 2x unknown : Virtual|Hub [] Owen On Wednesday 27 Feb 2002 12:30 pm, you wrote: > It works here on my inspiron 8000 with Rage Mobility Pro. Do you have your > display set to 16bit? > > Here's my xf86config if it helps. > > On Tuesday 26 February 2002 16:15, OS wrote: > > Hello, > > > > I still have no accelleration here on my Rage Mobility Pro chipset using > > kernel-2.4.17-21mdk and XF 4.2.0-7mdk. glxinfo reports "direct rendering: > > No" and gears reports a frame rate of 90/sec ! agpgart is loaded but > > reports no users. If I manually load r128 agpgart then reports 1 user, > > but still no 3D accelleration. > > > > Owen > > > > On Tuesday 26 Feb 2002 4:02 pm, you wrote: > > > richard <[EMAIL PROTECTED]> writes: > > > > hi all > > > > can some tell me if the 3d accelleration is a mandrake addon or not.? > > > > > > No, if you use XF 4.2 (not 4.1) and current kernel it should work, if > > > you mix an old version of XFree with current kernel, do not activate > > > DRI (hardware 3D). > > > > > > Fran�ois.
