It works better because it creates /dev/video*
But it also gives me this error msg:
(/var/log/messages after insmod command)
USB Quickcam Class ff SubClass ff idVendor 46d idProduct 870
USB Quickcam camera found using: $Id: quickcam.c,v 1.101 2002/02/13 22:44:43
jfclere Exp $
quickcam: probe of HDCS1000 sensor = 10 00 id: 08
quickcam: probe of BP100 sensor = 00 10 id: 64
quickcam: probe of VV6410 sensor = 00 10 id: 19
quickcam: probe of HDCS1020 sensor = 10 10 id: 10
quickcam: HDCS1020 sensor detected
(/var/log/messages after running gnomemeeting)
quickcam: warning -> frame overflow (49)
quickcam: frame size is incorrect! (49)
quickcam: warning -> frame overflow (49)
quickcam: frame size is incorrect! (49)
quickcam: frame size is incorrect! (49)
Le Mars 22, 2002 03:26 AM, vous avez �crit :
> Hi,
>
> mod_quickcam does not work with my Quickcam Express because the chip is a
> STV0602-AA instead of STV0600 (the chip the official Mandrake 8.2
> -2.4.18-6mdk- mod_quickcam is written for).
>
> 1)Everything is in this mail. You can set up that manually like this:
>
> ----------------------------------------------------------
> Salvador Arroyo Fdez� Dexxa STV602 patch
> dexxa webcam STV0602-AA Agilent QDCS 1005 ID: 870
> from cvs module hdcs.c
> function hdcs_init change:
> line 96: STV_ISO_SIZE, 0x034f to STV_ISO_SIZE, 0x0284
> line 115: HDCS_INTEGRATE, 0x9 to HDCS_INTEGRATE, 0x7e
> add about line 138:
> if (usb_quickcam_set1(dev, 0x1446, 0x01) < 0) goto error;
> compile an then run as per normal
> ./quickcam.sh
> xawtv -c /dev/video0 -geometry 320x240
> ********STV602 sensor patch submitted by Salvador requires testing
> Using� the cvs version which can be dowloaded from the online
> cvs
> without checking in all components
> have to be dowloaded
> �---------------------------------------------------------------
>
> 2) or you can sync with the CVS doing:
>
> Anonymous CVS Access
> This project's SourceForge CVS repository can be checked out through
> anonymous (pserver) CVS with the following instruction set. The module you
> wish to check out must be specified as the modulename. When prompted
> for a password for anonymous, simply press the Enter key.
>
> $cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/qce-ga login
> �
> $cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/qce-ga co
> quickcam
>
> Updates from within the module's directory do not need the -d parameter.
> (from sourceforge)
>
> Then,
> $make
> $./quickcam.sh
>
> The module is loaded (insmoded) along with the necessary videodev and this
> time /dev/video* is created (not as before with the 2.4.18-6mdk
> mod_quickcam).
>
> Enjoy :P
>
> marc
-------------------------------------------------------
