On Wednesday 17 April 2002 03:57 am, Borsenkow Andrej wrote:
Here is the oops from the current crash.
It is the same as the old crash.
fs/devfs/base.c has the offending call.
Also attached is the dmesg from the boot. You will see a number of odd
messages associated with the zip drive. (The zip drive works. It shows up at
an odd spot that devfs seems unable to deal with. Usually /dev/sda4 instead
of /dev/sda0, but it trys to find the partition table on /dev/sda0. (Or
actually /dev/scsi/host1/bus0/target0/lun0, which is about the same
thing...))
Hopefully that helps.
ksymoops 2.4.3 on i686 2.4.18-aro. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.18-aro/ (default)
-m /boot/System.map-2.4.18-aro (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Apr 17 04:06:21 kludge kernel: Unable to handle kernel paging request at virtual
address 204f2f8d
Apr 17 04:06:21 kludge kernel: c0174293
Apr 17 04:06:21 kludge kernel: *pde = 00000000
Apr 17 04:06:21 kludge kernel: Oops: 0000
Apr 17 04:06:21 kludge kernel: CPU: 0
Apr 17 04:06:21 kludge kernel: EIP: 0010:[scan_dir_for_removable+19/64] Not
tainted
Apr 17 04:06:21 kludge kernel: EIP: 0010:[<c0174293>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
Apr 17 04:06:21 kludge kernel: EFLAGS: 00010202
Apr 17 04:06:21 kludge kernel: eax: c0aa8460 ebx: 204f2f49 ecx: 00000000 edx:
c0aa8460
Apr 17 04:06:21 kludge kernel: esi: c42bbba0 edi: c3d3a7a0 ebp: c8fdca60 esp:
cb631f28
Apr 17 04:06:21 kludge kernel: ds: 0018 es: 0018 ss: 0018
Apr 17 04:06:21 kludge kernel: Process msec_find (pid: 8079, stackpage=cb631000)
Apr 17 04:06:21 kludge kernel: Stack: c42bbba0 c0174726 c3d3a7a0 c027d100 00000000
c42bbba0 c42bbc20 c42bbc0c
Apr 17 04:06:21 kludge kernel: c8fdca60 c0143770 c8fdca60 cb631fa0 c0143c70
c8fdca60 fffffff7 0000000d
Apr 17 04:06:21 kludge kernel: bfffecf8 c0143e1f c8fdca60 c0143c70 cb631fa0
c4bbf540 c4bbf2c0 c8fdca60
Apr 17 04:06:21 kludge kernel: Call Trace: [devfs_readdir+86/448] [vfs_readdir+96/144]
[filldir64+0/352] [sys_getdents64+79/185] [filldir64+0/352]
Apr 17 04:06:21 kludge kernel: Call Trace: [<c0174726>] [<c0143770>] [<c0143c70>]
[<c0143e1f>] [<c0143c70>]
Apr 17 04:06:21 kludge kernel: [<c0135b6d>] [<c0108973>]
Apr 17 04:06:21 kludge kernel: Code: 66 8b 43 44 25 00 f0 00 00 66 3d 00 60 75 0d f6
43 10 04 74
>>EIP; c0174292 <scan_dir_for_removable+12/40> <=====
Trace; c0174726 <devfs_readdir+56/1c0>
Trace; c0143770 <vfs_readdir+60/90>
Trace; c0143c70 <filldir64+0/160>
Trace; c0143e1e <sys_getdents64+4e/b8>
Trace; c0143c70 <filldir64+0/160>
Trace; c0135b6c <sys_fchdir+ac/c0>
Trace; c0108972 <system_call+32/40>
Code; c0174292 <scan_dir_for_removable+12/40>
00000000 <_EIP>:
Code; c0174292 <scan_dir_for_removable+12/40> <=====
0: 66 8b 43 44 mov 0x44(%ebx),%ax <=====
Code; c0174296 <scan_dir_for_removable+16/40>
4: 25 00 f0 00 00 and $0xf000,%eax
Code; c017429a <scan_dir_for_removable+1a/40>
9: 66 3d 00 60 cmp $0x6000,%ax
Code; c017429e <scan_dir_for_removable+1e/40>
d: 75 0d jne 1c <_EIP+0x1c> c01742ae
<scan_dir_for_removable+2e/40>
Code; c01742a0 <scan_dir_for_removable+20/40>
f: f6 43 10 04 testb $0x4,0x10(%ebx)
Code; c01742a4 <scan_dir_for_removable+24/40>
13: 74 00 je 15 <_EIP+0x15> c01742a6
<scan_dir_for_removable+26/40>
Apr 17 17:47:34 kludge kernel: 8139too Fast Ethernet driver 0.9.24
Apr 17 17:47:40 kludge kernel: ac97_codec: AC97 Audio codec, id: 0x8384:0x7609
(SigmaTel STAC9721/23)
1 warning issued. Results may not be reliable.
Linux version 2.4.18-aro ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Mandrake Linux 8.2 2.96-0.76mdk)) #2 Tue Apr 16 18:06:22 PDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=2418-aro ro root=305 devfs=mount hdc=ide-scsi
ide_setup: hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 645.669 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1287.78 BogoMIPS
Memory: 256688k/262080k available (1244k kernel code, 5004k reserved, 353k data, 272k
init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb340, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
Journalled Block Device driver loaded
devfs: v1.12 (20020219) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: WDC WD300AB-60BVA0, ATA DISK drive
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdd: FUJITSU MPE3170AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78177792 sectors (40027 MB) w/1820KiB Cache, CHS=4866/255/63, UDMA(33)
hdb: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=3649/255/63, UDMA(33)
hdd: 33360580 sectors (17081 MB) w/512KiB Cache, CHS=33095/16/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
/dev/ide/host0/bus0/target1/lun0: p1
/dev/ide/host0/bus1/target1/lun0: [PTBL] [2076/255/63] p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: ide0(3,5): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 180850
EXT3-fs: ide0(3,5): 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
Adding Swap: 570268k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 5 for device 00:10.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5
<Adaptec 2940 SCSI adapter>
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: Model: CD-R/RW RW7060S Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: IOMEGA Model: ZIP 100 Rev: 23.D
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 6, lun 0
(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 10 for device 00:14.0
eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xd0898000, 00:e0:29:6f:4e:6b, IRQ
10
eth0: Identified 8139 chip type 'RTL-8139B'
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:37:16 Apr 16 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
es1371: version v0.30 time 17:35:38 Apr 16 2002
PCI: Found IRQ 3 for device 00:09.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xe400 irq 3
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
VFS: Disk change detected on device 08:00
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
