David Eastcott <[EMAIL PROTECTED]> writes: > 1. Minimal Install selection; once Truely minimal ... is selected, you can't > select either With X or With docs, but OK button works and you can go on with > installation.
those are *grayed*, unselect "truly minimal" first! > > 2. Liked the new monitor selection screen. However, I can not select 32 bit > depth any more (I could with 1.712). Monitor is AOC Spectrum 5E, card is ATI > Mach 64 Utah (aka Xpert98 8MB AGP) One can't really choose between 24 and 32 bpp in XFree4 (as far as i've tested & understood). So if XFree4 is chosen i don't propose 32 (choosing between 24&32 is done via DefaultFbBpp, which usually defaults to 32, but it's only for alpha layer (?)) > 1. It seems that the 3.3.6 versions of XFree86-Mach64 and > XFree86-server-common are being installed during the Configure X step, even > though the 4.2.0 versions were installed during the package install step. > > Consequently, /etc/X11/X is pointing at the /usr/X11R6/bin/XFree-Mach64, and > bad things happen because the XFree86.config file is being reported as > missing an expect Device label. can you send me your /root/drakx/report.bug.gz (privately) > 2. Both auto install diskettes and the replay_install.img file contain good > auto_inst.cfg files. However, after using drakconf to re-generate the > replay install diskette, there is both the new 'interactiveSteps' and the old > perl-script fragment present in the auto_inst.cfg file. ok, changed (not tested :)
