> > > Installing with network.img > > > > You didn't precise which network install you chose. Assuming NFS.
Tried HTTP, NFS and FTP. All same error. > > > Network adapter was autodetected correctly. > > > Specified DHCP > > > Supplied host and domain name. > > > > > > Install Exited Abnormally > > > Received Signal 11 > > > > Humm, a segfault, nice :-). > > > > The problem being that we don't have a segfault here when we try > > the exact same install path, so it's hard to understand & fix > > :-(. > > > > Anything special you're doing? Any special hardware? Network Adapter is a Pcnet/PCI II 79C970A in the VMWare session (worked since Mdk 7.2 AFAIK). Realtek 8139 (normally use 8139too module) in another. Both same error. > > > > > configuring device eth0 ip: 192.168.44.129 nm: 255.255.255.0 nw: > > > 192.168.44.0 bc: 192.168.44.255 > > > > Hum, seems regular... > > > > After that, what's done is the DNS request. Any hope you have a > > bogus DNS server which may send malformed response? This might > > lead to a segfault, maybe. You can try disabling your DNS server, > > for example. Can't shutdown the DNS as its used on our network for a lot of routing, but I've checked its logs - there are no DNS requests being processed at the time the installer segfaults. Just tried latest build, same issue. ALT+F4: (From VMWare session machine) <6>pcnet32.c:v1.27a 10.02.2002 [EMAIL PROTECTED] <4>PCI: Enabling device 00:11.0 (0001 -> 0003) <6>PCI: Assigned IRQ10 for device 00:11.0 <6>pcnet32: PCnet/PCI II 79C970A at 0x10a0, 00 50 56 59 3c 7a assigned IRQ 10 <6>eth0: registered as Pcnet/PCI II 79C970A <6>pcnet32: 1 cards_found And that�s it. I have tried two DNS / DHCP Servers - VMWare internal and whats running on my Mdk 8.2 server. I have also tried specifying a static IP. Andy
