[I know that I should not answer on top ...] Could you please show
/proc/cmdline /etc/modules /etc/modules.conf output of dmesg (or /var/log/dmesg if it is scrolled off too far) list of modules before the first cdrecord, after and after the second. -andrej > > > Hello, > > Since some time I need to rmmod and modprobe ide-scsi to make it recognise > both cdroms. > When I first run cdrecord -scanbus it only recognises my second device. > After > reloading ide-scsi it recognises them fine. > Running cat on /proc/scsi/scsi lists them both in both cases. > > I'm running on an Intel 440 motherboard, and use > /etc/sysconfig/harddiskhdb > and *hdd to turn off dma for both drives. > (USE_DMA=0 and EIDE_32BIT=3) > I also use devfs and have no other scsi devices or cards. > I haven't got a clue where this problem comes from. > > > # cdrecord -scanbus > Cdrecord 1.11a27 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg > Schilling > Linux sg driver version: 3.1.24 > Using libscg version 'schily-0.6' > scsibus0: > 0,0,0 0) * > 0,1,0 1) * > 0,2,0 2) * > 0,3,0 3) 'LITE-ON ' 'LTR-12101B ' 'LS3G' Removable CD-ROM > [snip] > # rmmod ide-scsi > # modprobe ide-scsi > # cdrecord -scanbus > Cdrecord 1.11a27 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg > Schilling > Linux sg driver version: 3.1.24 > Using libscg version 'schily-0.6' > scsibus0: > 0,0,0 0) * > 0,1,0 1) 'LITEON ' 'DVD-ROM LTD163D ' 'GHR3' Removable CD-ROM > 0,2,0 2) * > 0,3,0 3) 'LITE-ON ' 'LTR-12101B ' 'LS3G' Removable CD-ROM > > > -- > Marcel Pol > > Linux 2.4.18-20mdksmp, up 5 days, 22:04 > Registered User #163523
