> > > > > I have a machine that has a RTL8139 network card
> > > integrated into it.
> > > > >
> > > > > cat /proc/pci under mandrake 8.1 shows it on IRQ11.
> > > > >
> > > > > When I boot off the network.img, and try to load the
> > > RTL8139 module
> > > > > (8139too), I get insmod failed.
> > > > >
> >
> > More Info:
> >
> > After the failed insmod, I just switched to ALT+F4 and saw two lines
> > that interest me.
> > <6> PCI BIOS revision 2.10 entry at 0xfb360, last bus=1
> > <4> PIC: System does not support PCI.
> >
> > This is interesting, as although the network card is
> integrated, AFAIK
> > it is on the PCI bus :)
> >
> > Using Cooker build Aug 7 2002 01:56:53, network.img, ftp install.
> >
>
> Problem still occurs with Aug 9 build.
>
> Can anyone give me any pointers too look for? Any extra information I
> can provide??
>
More info.
Problem appears to be Cooker doesn't recognise or load the PCI bus at
all.
Attached is a cat /proc/pci on a Mdk 8.1 build running on the machine.
Andy
[root@shuttle proc]# cat pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 1039:0740 (Silicon Integrated Systems [SiS]) (rev 1)
