[EMAIL PROTECTED] writes:
> The installation of Beta3 went quit well except of the sound card detection.
> Beta1 and 2 worked very well but not Beta3. I have a Sound Blaster Live Value
>Digital 1024 installed.
> When I run sndconfig the card is detected but after hitting OK it says "Sound
>Blaster Live Value not supported "
> Any suggestions?
> BKO
can you overwrite
Mandrake/mdkinst/usr/bin/perl-install/list_modules.pm with the
following file:
package list_modules;
use MDK::Common;
our @ISA = qw(Exporter);
our @EXPORT = qw(load_dependencies dependencies_closure category2modules
module2category sub_categories);
# the categories have 2 purposes
# - choosing modules to include on stage1's (cf update_kernel and
mdk-stage1/pci-resource/update-pci-ids.pl)
# - performing a load_category or probe_category (modules.pm and many files in
perl-install)
our %l = (
################################################################################
network =>
{
main => [
if_(arch() =~ /ppc/, qw(mace bmac gmac)),
if_(arch() =~ /^sparc/, qw(myri_sbus sunbmac sunhme sunqe)),
if_(arch() !~ /alpha/ && arch() !~ /sparc/,
qw(3c501 3c503 3c505 3c507 3c509 3c515), # 3c90x
qw(82596 abyss ac3200 acenic aironet4500_card at1700 atp com20020-pci),
qw(cs89x0 de600 de620),
qw(defxx orinoco_plx), # most unused
qw(depca dgrs dmfe e100 e1000 e2100 eepro eepro100 eexpress epic100 eth16i),
qw(ewrk3 hamachi hp hp-plus hp100 ibmtr),
qw(lance natsemi ne ne2k-pci ni5010 ni52 ni65 olympic pcnet32 plip rcpci),
#old_tulip
qw(sb1000 sis900 sk98lin smc-ultra smc9194 starfire tlan tmspci tulip
via-rhine), #sktr
qw(wd winbond-840 yellowfin ns83820),
qw(iph5526), #- fibre channel
),
qw(3c59x 8139too sundance dl2k), #rtl8139
],
raw => [
qw(8390 mii),
qw(ppp_generic ppp_async slhc aironet4500_core),
],
pcmcia => [
qw(3c574_cs 3c589_cs airo airo_cs aironet4500_cs axnet_cs fmvj18x_cs),
qw(ibmtr_cs netwave_cs nmclan_cs pcnet_cs ray_cs smc91c92_cs wavelan_cs
wvlan_cs),
qw(xirc2ps_cs xircom_cb xircom_tulip_cb),
],
usb => [
qw(pegasus kaweth usbnet catc CDCEther),
],
isdn => [
qw(hisax hysdn b1pci t1pci c4),
],
},
################################################################################
disk =>
{
scsi => [
if_(arch() =~ /ppc/, qw(mesh mac53c94)),
if_(arch() =~ /^sparc/, qw(qlogicpti)),
if_(arch() !~ /alpha/ && arch() !~ /sparc/,
qw(3w-xxxx AM53C974 BusLogic NCR53c406a a100u2w advansys aha152x aha1542
aha1740),
qw(atp870u dc395x_trm dtc fdomain g_NCR5380 in2000 initio pci2220i psi240i),
qw(qla1280 qla2x00 qlogicfas qlogicfc),
qw(seagate sim710 sym53c416 t128 tmscsim u14-34f ultrastor wd7000),
qw(eata eata_pio eata_dma),
),
'53c7,8xx',
qw(aic7xxx pci2000 qlogicisp sym53c8xx), # ncr53c8xx
],
hardware_raid => [
if_(arch() =~ /^sparc/, qw(pluto)),
if_(arch() !~ /alpha/ && arch() !~ /sparc/,
qw(DAC960 dpt_i2o megaraid aacraid ataraid cciss cpqarray gdth i2o_block),
qw(qla2200 qla2300 cpqfc),
qw(ips ppa imm),
),
],
pcmcia => [ qw(aha152x_cs fdomain_cs nsp_cs qlogic_cs ide-cs) ], #ide_cs
raw => [ qw(scsi_mod sd_mod) ],
usb => [ qw(usb-storage) ],
cdrom => [ qw(ide-cd cdrom sr_mod) ],
},
################################################################################
bus =>
{
usb => [ qw(usbcore usb-uhci usb-ohci ehci-hcd usbkbd keybdev input) ],
pcmcia => [
if_(arch() !~ /^sparc/, qw(pcmcia_core tcic ds i82365 yenta_socket)), #
cb_enabler
],
#serial_cs
#ftl_cs 3c575_cb apa1480_cb epic_cb serial_cb tulip_cb iflash2+_mtd iflash2_mtd
#cb_enabler
},
fs =>
{
network => [ qw(af_packet nfs lockd sunrpc) ],
cdrom => [ qw(isofs) ],
loopback => [ qw(isofs loop) ],
local => [
if_(arch() =~ /^i.86/, qw(vfat fat)),
if_(arch() =~ /^ppc/, qw(hfs)),
qw(reiserfs),
],
various => [ qw(smbfs romfs jbd xfs) ],
},
################################################################################
multimedia =>
{
sound => [
if_(arch() =~ /ppc/, qw(dmasound_awacs)),
if_(arch() !~ /^sparc/,
qw(audigy cmpci cs46xx cs4281 emu10k1 es1370 es1371 esssolo1 i810_audio
maestro maestro3),
qw(nm256_audio pas16 rme96xx sonicvibes trident via82cxxx_audio ymfpci),
qw(snd-als100 snd-als4000 snd-azt2320 snd-cmi8330 snd-cmipci snd-cs46xx
snd-dt0197h),
qw(snd-cs4281 snd-emu10k1),
qw(snd-ens1370 snd-ens1371 snd-es18xx snd-es96 snd-es1938 snd-es1968
snd-es1688),
qw(snd-fm801 snd-ice1712 snd-intel8x0 snd-korg1212 snd-maestro3),
qw(snd-nm256 snd-rme96 snd-rme32 snd-opl3sa2 snd-sb16 nd-sgalaxy
snd-sonicvibes),
qw(snd-trident snd-usb-audio snd-via686 snd-via8233 snd-wavefront snd-ymfpci),
),
],
tv => [ qw(bttv cpia_usb ibmcam mod_quickcam ov511 ov518_decomp ultracam usbvideo
cyber2000fb saa7134) ],
photo => [ qw(dc2xx mdc800) ],
radio => [ qw(radio-maxiradio) ],
scanner => [ qw(scanner microtek) ],
joystick => [ qw(ns558 emu10k1-gp iforce) ],
},
various =>
# just here for classification, unused categories (nor auto-detect, nor
load_thiskind)
{
raid => [
qw(linear raid0 raid1 raid5 lvm-mod md multipath xor),
],
mouse => [
qw(busmouse msbusmouse logibusmouse serial qpmouse atixlmouse),
],
char => [
qw(amd768_rng applicom n_r3964 nvram pc110pad ppdev),
qw(mxser moxa isicom wdt_pci epca synclink istallion sonypi i810-tco sx), #-
what are these???
],
other => [
qw(agpgart defxx i810_rng i810fb ide-floppy ide-scsi ide-tape loop lp nbd sg st),
qw(parport parport_pc parport_serial),
qw(btaudio),
#- these need checking
qw(pcilynx sktr rrunner gmac meye 3c559 buz paep),
],
},
);
my %dependencies;
sub load_dependencies {
my ($file) = @_;
%dependencies = map {
my ($f, $deps) = split ':';
$f => [ split ' ', $deps ];
} cat_($file);
}
sub dependencies_closure {
my @l = map { dependencies_closure($_) } @{$dependencies{$_[0]} || []};
(@l, $_[0]);
}
sub category2modules {
map {
my ($t1, $t2s) = m|(.*)/(.*)|;
map {
my $l = $l{$t1}{$_} or die "bad category $t1/$_\n" . backtrace();
@$l;
} split('\|', $t2s);
} split(' ', $_[0]);
}
sub module2category {
my ($module) = @_;
foreach my $t1 (keys %l) {
my $h = $l{$t1};
foreach my $t2 (keys %$h) {
$module eq $_ and return "$t1/$t2" foreach @{$h->{$t2}};
}
}
return;
}
sub sub_categories {
my ($t1) = @_;
keys %{$l{$t1}};
}
1;
and redo an install ?
