mandrakeexpert incident 30074 forwarded to cooker. -- Alan ----quoted text below----
"SERGEI ZUYEV" <[EMAIL PROTECTED]> sergei : 25/08 04:37 : Incident created LM9.0 beta3 I have Belkin IEEE1394 card and HP DVD RW dvd200e writer attached to it. I insmod ieee1394 and ohci1394 (modules were not inserted during the boot) and verify with cdrecord --scanbus that it has been recognised. Moreover, I black successfully a CD-RW disk. But when I try to write on it with cdrecord, it loses the device after actually trying to wr ite anything. Here is the related dmesg output: ieee1394: Device added: Node[00:1023] GUID[0060b0000000e744] [HP ] ieee1394: Host added: Node[01:1023] GUID[00303c000009489e] [Linux OHCI-1394] ieee1394: Host added: Node[00:1023] GUID[00023c002101884e] [Linux OHCI-1394] ieee1394: sbp2: Node 00:1023: Using 36byte inquiry workaround ieee1394: sbp2: Logged into SBP-2 device ieee1394: sbp2: Node[00:1023]: Max speed [S400] - Max payload [2048] scsi1 : IEEE-1394 SBP-2 protocol driver (host: ohci1394) $Rev: 530 $ James Goodwin SBP-2 module load options: - Max speed supported: S400 - Max sectors per I/O supported: 255 - Max outstanding commands supported: 8 - Max outstanding commands per lun supported: 1 - Serialized I/O (debug): no - Exclusive login: yes scsi2 : IEEE-1394 SBP-2 protocol driver (host: ohci1394) $Rev: 530 $ James Goodwin SBP-2 module load options: - Max speed supported: S400 - Max sectors per I/O supported: 255 - Max outstanding commands supported: 8 - Max outstanding commands per lun supported: 1 - Serialized I/O (debug): no - Exclusive login: yes Vendor: HP Model: DVD Writer 200j Rev: 1.27 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray ieee1394: sbp2: aborting sbp2 command Write (10) 00 00 00 00 00 00 00 1f 00 ieee1394: sbp2: aborting sbp2 command Test Unit Ready 00 00 00 00 00 ieee1394: sbp2: reset requested ieee1394: sbp2: Generating sbp2 fetch agent reset ieee1394: sbp2: aborting sbp2 command Test Unit Ready 00 00 00 00 00 ieee1394: sbp2: reset requested ieee1394: sbp2: Generating sbp2 fetch agent reset ieee1394: sbp2: aborting sbp2 command Test Unit Ready 00 00 00 00 00 scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 0 lun 0 -----end quoted text-----
