-I sent this earlier today, but haven't seen it come through on the list
yet, I apologize if you get this twice.

uname -r 
2.4.19-8mdk 

I posted about this before and haven't gotten anywhere.  C-Media
CMI8738-MX Chipset on a Soyo KT333/Ultra Dragon Main board.System locks
up hard about 15-30 seconds into any audio playback, With the same
output to f12 console (attached - crash.txt), every time, (with both
alsa and oss modules loaded. 

Today I've been trying everything I can think off to see what crashes
and what doesn't.  Using draksound I select the alsa module, console
output: 
Saving mixer settings                                           [  OK  ]
Starting ALSA version 0.9.0rc2: cmipci.                         [  OK  ]
Loading mixer settings                                          [  OK  ]

lsmod (snd*): 
Module                  Size  Used by    Tainted: PF 
snd-seq-midi            3680   0  (autoclean) (unused) 
snd-opl3-synth          9860   0  (autoclean) (unused) 
snd-seq-instr           4816   0  (autoclean) [snd-opl3-synth] 
snd-seq-midi-emul       4880   0  (autoclean) [snd-opl3-synth] 
snd-ainstr-fm           1780   0  (autoclean) [snd-opl3-synth] 
snd-seq-oss            26176   0  (unused) 
snd-seq-midi-event      3208   0  [snd-seq-midi snd-seq-oss] 
snd-seq                33264   2  [snd-seq-midi snd-opl3-synth
snd-seq-instr snd-seq-midi-emul snd-seq-oss snd-seq-midi-event] 
snd-pcm-oss            36932   0  (unused) 
snd-mixer-oss           9016   0  [snd-pcm-oss] 
snd-cmipci             15628   0 
snd-pcm                55808   0  [snd-pcm-oss snd-cmipci] 
snd-opl3-lib            5764   0  [snd-opl3-synth snd-cmipci] 
snd-hwdep               3840   0  [snd-opl3-lib] 
snd-timer               9964   0  [snd-seq snd-pcm snd-opl3-lib] 
snd-mpu401-uart         2752   0  [snd-cmipci] 
snd-rawmidi            12864   0  [snd-seq-midi snd-mpu401-uart] 
snd-seq-device          3836   0  [snd-seq-midi snd-opl3-synth
snd-seq-oss snd-seq snd-opl3-lib snd-rawmidi] 
snd                    24804   0  [snd-seq-midi snd-opl3-synth
snd-seq-instr snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss
snd-mixer-oss snd-cmipci snd-pcm snd-opl3-lib snd-hwdep snd-timer
snd-mpu401-uart snd-rawmidi snd-seq-device] 
soundcore               3780   0  [snd] 

modules.conf: 
probeall scsi_hostadapter aic7xxx 
alias eth0 tulip 
alias sound-slot-0 snd-cmipci 
probeall usb-interface usb-uhci ehci-hcd 
alias ieee1394-controller ohci1394 
alias eth1 8139too 
above snd-cmipci snd-pcm-oss 

go to playback an .ogg, switch to f12,and within seconds, system
crashes, with the output in the attachment. 

Reboot, use draksound to switch to OSS module: 

Saving mixer settings                                           [  OK  ]
Shutting down ALSA sound driver (version 0.9.0rc2):             [  OK  ]
rmmod: module snd-cmipci is not loaded 
Loading sound module (cmpci)                                    [  OK  ]
Loading mixer settings                                          [  OK  ]

lsmod: 

cmpci                  27052   0 
soundcore               3780   0  [cmpci] 

modules.conf: 

probeall scsi_hostadapter aic7xxx 
alias eth0 tulip 
alias sound-slot-0 cmpci 
probeall usb-interface usb-uhci ehci-hcd 
alias ieee1394-controller ohci1394 
alias eth1 8139too 
above snd-cmipci snd-pcm-oss 


Notice the inclusion of the above snd-cmipci snd-pcm-oss alsa stuff
still. either way, playback .ogg, crash with same output.  Reboot,
playback, crash.  remove the above snd-cmipci snd-pcm-oss alsa from
modules.conf, reboot, playback crash with same output. 

I don't know where to turn from here. On previous installs of 8.2 (for
sure) and an earlier beta (not sure if I tested sound) Sound seemed to
work fine.

divide error: 0000
CPU:    0
EIP:    0010:[<c01200a0>]       Tainted: PF
EFLAGS: 0000082
eax: 00000000   ebx: 00000001   ecx: 00000001   edx: 00000046
esi: c02bb560   edi: fffffffe   ebp: c0297f58   esp: c0297f48
ds: 0018   es: 0018   ss: 0018
Process swapper (pid: 0, stackpage=c0297000)
Stack: 00000046 c02b9900 00000000 c0297f78 c0297f70 c010a416 c025d53c 000051ce
       c0296000 00000010 c0297fc4 c010c8c8 000051ce 00000000 00000000 c0296000
       00000010 c0297fc4 00000000 00000018 00000018 ffffff00 c01071a4 00000010
Call Trace:    [<c010a416>] [<c010c8c8>] [<c01071a4>] [<>c0114b35>] [<c0114a80>]
  [<c0107212>] [<c0105000>]

Code: f7 c3 01 00 00 00 75 4f 83 c6 08 d1 eb 75 f1 fa 8b 1d 60 5c
 <0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing

Reply via email to