I have two cdrom drives, as you can see below. After a rc1 upgrade the
installer removed both of my cdrom drives (which work fine) from
/etc/fstab.
Also devfsd seems to be having a hard time picking up hdc, if I access
hdd then hdc becomes populated in /dev/ide/host0/bus1/target0/lun0 but a
softlink in /dev is not created.
hda: WDC WD200BB-60CJA0, ATA DISK drive
hdb: WDC AC310200R, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
hdd: WDC WD800BB-00CAA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63,
UDMA(100)
hdb: 20044080 sectors (10263 MB) w/512KiB Cache, CHS=1247/255/63,
UDMA(66)
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63,
UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >
/dev/ide/host0/bus0/target1/lun0: p1
/dev/ide/host0/bus1/target1/lun0: [PTBL] [9729/255/63] p1
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2940A Ultra SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 04
/dev/scsi/host0/bus0/target2/lun0/cd
