On Tuesday 24 September 2002 09:35 am, marrandy wrote:
> On Monday 23 September 2002 08:16 pm, marrandy wrote:
> > Hello.
> >
> > I'm not a programmer, but will try and give you as much info as I can.
>
> Well I didn't really want to join cooker anyway.
>
> Put the Two kmail bugs into kmail.kde.org
>
> The ps/2 mouse problem bit me again this morning.  Just a fropzen pointer.


It happened again but I was watching the boot messages this time.

Said   /dev/psaux doesn't exist  which is interesting as it does.

It worked O.K. on the next boot.

Here's some info

 cd /dev
ls ps* -l | more
lr-xr-xr-x    1 root     root           10 Sep 24 06:53 psaux -> misc/psaux
cd misc
ls ps* -l | more
crw-r-----    1 root     root      10,   1 Sep 24 10:56 psaux
vi psaux
"psaux" is not a file 

Not sure whether you need dmesg, but here it is

Linux version 2.4.19-13mdk ([EMAIL PROTECTED]) (gcc version 3.2 
(Mandrake Linux 9.0 3.2-1mdk)) #1 Wed Sep 18 04:19:10 CEST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
 BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
 BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 65532
zone(0): 4096 pages.
zone(1): 61436 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda1 quiet devfs=mount hdc=ide-scsi vga=788
ide_setup: hdc=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 1715.281 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3420.97 BogoMIPS
Memory: 256744k/262128k available (1176k kernel code, 4996k reserved, 444k 
data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
CPU:             Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1715.3011 MHz.
..... host bus clock speed is 100.8998 MHz.
cpu: 0, clocks: 1008998, slice: 504499
CPU0<T0:1008992,T1:504480,D:13,S:504499,C:1008998>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf15a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xf0000000, mapped to 0xd0800000, size 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:c1a0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT 
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS5513
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC AC28400R, ATA DISK drive
hdc: 24X10, ATAPI CD/DVD-ROM drive
hdd: WDC AC22500L, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63
hdd: 4999680 sectors (2560 MB) w/256KiB Cache, CHS=4960/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
 /dev/ide/host0/bus1/target1/lun0: p1 p2
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:02.2
PCI: Sharing IRQ 5 with 00:02.3
PCI: Sharing IRQ 5 with 00:0b.0
usb-ohci.c: USB OHCI at membase 0xd4933000, IRQ 5
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:02.3
PCI: Sharing IRQ 5 with 00:02.2
PCI: Sharing IRQ 5 with 00:0b.0
usb-ohci.c: USB OHCI at membase 0xd4935000, IRQ 5
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Adding Swap: 248968k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: ATAPI     Model: CD-R/RW 24X10     Rev: P.GJ
  Type:   CD-ROM                             ANSI SCSI revision: 02
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 11 for device 00:08.0
PCI: Sharing IRQ 11 with 01:00.0
eth0: RealTek RTL-8029 found at 0xa800, IRQ 11, 00:E0:7D:76:E0:4E.
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
PCI: Found IRQ 5 for device 00:0b.0
PCI: Sharing IRQ 5 with 00:02.2
PCI: Sharing IRQ 5 with 00:02.3
eth1: ns83820 v0.18: DP83820 v1.2: 00:04:5a:72:2a:cc io=0xe5000000 irq=5 f=sg
eth1: link now down.
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
es1371: version v0.30 time 04:44:36 Sep 18 2002
PCI: Found IRQ 10 for device 00:09.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xa400 irq 10
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
inserting floppy driver for 2.4.19-13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: Printer, HEWLETT-PACKARD OFFICEJET R40XI
lp0: using parport0 (polling).
Splash status on console 0 changed to off


Reply via email to