Le Sat, 28 Sep 2002 05:32:50 +0000, John V. Turek a écrit : > On 28/09/02 11:12 +0200, Pbt wrote: >> Hello, >> I've some problems with my Sony Clié (Palmos 4.1) under linux... When I >> try to hotsync it, i've this in my /var/log/messages : >> >> Sep 28 11:00:36 unsigned kernel: hub.c: USB new device connect on >> bus1/2, assigned device number 4 >> Sep 28 11:00:36 unsigned kernel: usbserial.c: Sony Cli 4.x converter >> detected >> Sep 28 11:00:36 unsigned kernel: visor.c: Sony Cli 4.x: Number of ports: >> 2 >> Sep 28 11:00:36 unsigned kernel: visor.c: Sony Cli 4.x: port 1, is for >> Generic use and is bound to ttyUSB0 >> Sep 28 11:00:36 unsigned kernel: visor.c: Sony Cli 4.x: port 2, is for >> HotSync use and is bound to ttyUSB1 >> Sep 28 11:00:36 unsigned kernel: usbserial.c: Sony Cli 4.x converter now >> attached to ttyUSB0 (or usb/tts/0 for devfs) Sep 28 11:00:36 unsigned >> kernel: usbserial.c: Sony Cli 4.x converter now attached to ttyUSB1 (or >> usb/tts/1 for devfs) Sep 28 11:00:39 unsigned /etc/hotplug/usb.agent: >> Setup visor for USB product 54c/9a/100 >> Sep 28 11:00:49 unsigned kernel: visor.c: Device lied about number of >> ports, please use a lower one. >> Sep 28 11:00:59 unsigned kernel: visor.c: Device lied about number of >> ports, please use a lower one. >> >> >> The last line explain the problem, i think... Is it a bug in the "visor" >> module ? I know that it exists patches for the visor module in order to >> make work Cli� but i thought that it was already included in the latest >> mdk kernel? Is it? >> I don't have this error when i do my FIRST hotsync. If i try to sync it >> the first time with jpilot, the Cli� sends me an error : "Your hotsync >> software can't use palmOS 4.1 passwords, please, upgrade it". >> >> Softs can't use palmOS 4.1 ? I have used (without results) jpilot, >> kpilot, etc... >> >> Pierre >> > I've just spent 5 hours myself trying to get my Sony Clie to work with > Mandrake 9.0 Dolphin, with no luck. I was able to get pilot-xfer to talk > to my sony to *start* backing up my pilot database, but then it locks my > mouse and pilot up, and i have to reboot. > > I agree with Pierre that there might be a bug in the visor module. > > Anybody else have a Sony Clie?
Yes, me and Fran�ois Pons and Cli� synchronization work perfectly :)) But you MUST use /dev/ttyUSB0, not /dev/ttyUSB1, because some Cli� are not reporting the correct port.. Be sure also to remove any password on your cli�, I think it is not supported by pilot-link yet.. -- Fr�d�ric Crozat MandrakeSoft
