Could this supermount error be related to the problems I am having with supermount and the usb-uhci/sr_mod loaded Flash memory-card reader?
When I try to use the Flash card with supermount none /mnt/flash supermount dev=/dev/sda1,fs=vfat,user,noauto 0 0 it reads a few files and then hangs. It may also be an issue with interrupts -- the drive will lock up if I use non-supermount fstab user-mount statements -- to use the Flash card with LM9.0, I must disable (rmmod) my CD-RW drive support and vice-versa, to use my CDRW, I must rmmod the usb-uhci and sr_mod (which kills the mouse until a reboot) ... the two devices will not co-exist. There were no problems with either device under LM8.2 If it helps, here's what I get in my log. The interrupt status messages continue until I pop the Flash card, resetting the device. Sep 22 13:30:23 maya kernel: usb.c: USB device 5 (vend/prod 0x5dc/0x2) is not claimed by any active driver. Sep 22 13:30:28 maya /etc/hotplug/usb.agent: Setup usb-storage for USB product 5dc/2/1 Sep 22 13:30:28 maya kernel: usb.c: registered new driver usb-storage Sep 22 13:30:30 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1753 Sep 22 13:30:33 maya kernel: usb_control/bulk_msg: timeout Sep 22 13:31:04 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1524 Sep 22 13:31:10 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1436 Sep 22 13:31:16 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1340 ... Sep 22 13:31:22 maya kernel: usb.c: USB disconnect on device 5 Sep 22 13:31:22 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1221 Sep 22 13:31:29 maya /etc/hotplug/usb.agent: Setup usb-storage for USB product 5dc/2/1 Sep 22 13:34:14 maya kernel: usb-uhci.c: interrupt, status 2, frame# 692 Sep 22 13:34:20 maya kernel: usb-uhci.c: interrupt, status 2, frame# 596 Sep 22 13:34:26 maya kernel: usb-uhci.c: interrupt, status 2, frame# 500 ... Sep 22 13:35:04 maya kernel: usb-uhci.c: $Revision: 1.275 $ time 07:51:45 Aug 30 2002 Sep 22 13:35:04 maya kernel: usb-uhci.c: High bandwidth mode enabled Sep 22 13:35:04 maya kernel: usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9 Sep 22 13:35:04 maya kernel: usb-uhci.c: Detected 2 ports Sep 22 13:35:04 maya kernel: usb.c: new USB bus registered, assigned bus number 1 Sep 22 13:35:04 maya kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Sep 22 13:35:04 maya usb: Loading USB interface0 (usb-uhci usb-uhci) succeeded Sep 22 13:35:06 maya kernel: input0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb1:3.0 Sep 22 13:35:06 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1756 Sep 22 13:35:06 maya kernel: usb.c: USB device not accepting new address=4 (error=-110) Sep 22 13:35:10 maya /etc/hotplug/usb.agent: ... no modules for USB product 0/0/0 Sep 22 13:35:10 maya /etc/hotplug/usb.agent: ... no modules for USB product 4cc/1122/110 Sep 22 13:35:11 maya /etc/hotplug/usb.agent: Setup usbmouse hid for USB product 46d/c402/210 Sep 22 13:35:11 maya /etc/hotplug/usb.agent: Setup mousedev for USB product 46d/c402/210 Sep 22 13:35:12 maya /etc/hotplug/usb.agent: Setup se401 for USB product 471/30b/2036 Sep 22 13:35:12 maya /etc/hotplug/usb.agent: Setup usb-storage for USB product 5dc/2/1 Sep 22 13:35:43 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1818 Sep 22 13:35:46 maya kernel: usb_control/bulk_msg: timeout Sep 22 13:35:50 maya kernel: usb_control/bulk_msg: timeout Sep 22 13:35:50 maya kernel: usb-uhci.c: interrupt, status 2, frame# 942 Sep 22 13:35:53 maya kernel: usb_control/bulk_msg: timeout Sep 22 13:38:41 maya kernel: usb.c: registered new driver usbdevfs Sep 22 13:38:41 maya kernel: usb.c: registered new driver hub -- Gary Lawrence Murphy - [EMAIL PROTECTED] - TeleDynamics Communications - blog: http://www.auracom.com/~teledyn - biz: http://teledyn.com/ - "Computers are useless. They can only give you answers." (Picasso)
