I was able to boot the 2.4.19.17 kernel, but USB is still broken:
Annoyingly, my flash reader stops reading at /exactly/ the same point,
midway through the 16th image :( Why/how could it be so reliable?
The same reader and the same disk loads fine in Mdk 8.2.
More to the point, how do I fix it or at least learn more about what's
going so horribly wrong. Here's some diagnostics if it helps ...
I'm using a Lexar CompactFlash reader, Mandrake 9.0
========================================================================
/proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=189/900 us (21%), #Int= 3, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ef80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04cc ProdID=1122 Rev= 1.10
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0471 ProdID=030b Rev=20.36
S: Manufacturer=HEI
S: Product=Philips Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 0 Alt= 3 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 0 Alt= 4 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=01(Isoc) MxPS= 640 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 0 Alt= 5 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=01(Isoc) MxPS= 768 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 0 Alt= 6 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=01(Isoc) MxPS= 896 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 0 Alt= 7 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=se401
E: Ad=81(I) Atr=01(Isoc) MxPS=1024 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05dc ProdID=0002 Rev= 0.01
S: Manufacturer=Lexar Media ?CF READER ? ????????????????
S: Product=CF READER ? ????????????????
S: SerialNumber= ????????????????
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c402 Rev= 2.10
S: Manufacturer=Logitech
S: Product=USB-PS/2 Trackball
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
========================================================================
# cat /proc/bus/usb/drivers
usbdevfs
hub
usb_mouse
96-111: hiddev
hid
se401
usb-storage
========================================================================
# lsmod
Module Size Used by Not tainted
vfat 9588 0 (autoclean)
fat 31864 0 (autoclean) [vfat]
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
ipt_state 568 3 (autoclean)
ipt_limit 856 32 (autoclean)
iptable_filter 1644 1 (autoclean)
ppp_deflate 41024 0 (unused)
bsd_comp 4344 0 (unused)
ppp_generic 20064 0 [ppp_deflate bsd_comp]
slhc 5072 0 [ppp_generic]
iptable_mangle 2072 0 (unused)
ipt_LOG 3384 1
ipt_MIRROR 1400 0 (unused)
ipt_MASQUERADE 1272 1
ipt_TOS 984 0 (unused)
ipt_REDIRECT 760 0 (unused)
iptable_nat 15224 1 [ipt_MASQUERADE ipt_REDIRECT]
ipt_REJECT 2744 0 (unused)
ip_tables 11672 13 [ipt_state ipt_limit iptable_filter iptable_mangle
ipt_LOG ipt_MIRROR ipt_MASQUERADE ipt_TOS ipt_REDIRECT iptable_nat ipt_REJECT]
ip_conntrack 18400 2 [ipt_state ipt_MASQUERADE ipt_REDIRECT iptable_nat]
sd_mod 11788 0 (autoclean) (unused)
sr_mod 15096 0 (autoclean)
floppy 49340 0 (autoclean)
parport_pc 21704 1 (autoclean)
lp 6720 0 (autoclean)
parport 23936 1 (autoclean) [parport_pc lp]
i810 59396 1
agpgart 31840 7 (autoclean)
es1371 26568 2
soundcore 3780 0 [es1371]
ac97_codec 9928 0 [es1371]
gameport 1660 0 [es1371]
nfsd 66576 8 (autoclean)
lockd 46480 1 (autoclean) [nfsd]
sunrpc 60188 1 (autoclean) [nfsd lockd]
af_packet 13000 1 (autoclean)
3c59x 27184 1 (autoclean)
se401 14612 0
videodev 5792 1 [se401]
keybdev 1920 0 (unused)
mousedev 4116 1
hid 18340 0 (unused)
usbmouse 2004 0 (unused)
input 3456 0 [keybdev mousedev hid usbmouse]
supermount 14340 2 (autoclean)
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
ide-scsi 8212 0
scsi_mod 90372 3 [sd_mod sr_mod ide-scsi]
usb-uhci 21676 0 (unused)
usbcore 58304 1 [se401 hid usbmouse usb-uhci]
rtc 6560 0 (autoclean)
========================================================================
Kernel command line: BOOT_IMAGE=2419-17 ro root=301 devfs=mount hdc=ide-scsi
ide_setup: hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
========================================================================
# mount
/dev/hda1 on / type ext2 (rw)
none on /proc type proc (rw)
none on /proc/bus/usb type usbdevfs (rw)
none on /dev type devfs (rw)
none on /dev/pts type devpts (rw,mode=0620)
/dev/hda6 on /home type ext2 (rw)
none on /mnt/cdrom type supermount (rw,dev=/dev/cdrom,fs=iso9660)
/dev/hdd1 on /mnt/disk2 type ext2 (rw)
none on /mnt/floppy type supermount (rw,dev=/dev/fd0,fs=vfat)
========================================================================
Here's the syslog:
Oct 25 21:06:08 maya kernel: usb.c: registered new driver usbdevfs
Oct 25 21:06:08 maya kernel: usb.c: registered new driver hub
Oct 25 21:06:08 maya kernel: usb-uhci.c: $Revision: 1.275 $ time 21:57:09 Oct 24 2002
Oct 25 21:06:08 maya kernel: usb-uhci.c: High bandwidth mode enabled
Oct 25 21:06:08 maya kernel: usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9
Oct 25 21:06:08 maya kernel: usb-uhci.c: Detected 2 ports
Oct 25 21:06:08 maya kernel: usb.c: new USB bus registered, assigned bus number 1
Oct 25 21:06:08 maya kernel: usb-uhci.c: v1.275:USB Universal Host Controller
Interface driver
Oct 25 21:06:08 maya kernel: usbdevfs: remount parameter error
Oct 25 21:06:08 maya kernel: usb.c: USB device 3 (vend/prod 0x46d/0xc402) is not
claimed by any active driver.
Oct 25 21:06:08 maya kernel: usb.c: USB device 4 (vend/prod 0x471/0x30b) is not
claimed by any active driver.
Oct 25 21:06:08 maya kernel: usb.c: registered new driver usb_mouse
Oct 25 21:06:08 maya kernel: input0: Logitech USB-PS/2 Trackball on usb1:3.0
Oct 25 21:06:08 maya kernel: usbmouse.c: v1.6:USB HID Boot Protocol mouse driverOct 25
21:06:08 maya kernel: usb.c: registered new driver hiddev
Oct 25 21:06:08 maya kernel: usb.c: registered new driver hid
Oct 25 21:06:08 maya kernel: se401.c: SE401 usb camera driver version 0.23 registering
Oct 25 21:06:08 maya kernel: usb.c: registered new driver se401
Oct 25 21:06:08 maya kernel: usb-uhci.c: interrupt, status 3, frame# 765
Oct 25 21:06:08 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1915
Oct 25 21:06:27 maya kernel: usb-uhci.c: interrupt, status 2, frame# 659
Oct 25 21:24:48 maya kernel: usb.c: USB device 5 (vend/prod 0x5dc/0x2) is not claimed
by any active driver.
Oct 25 21:24:52 maya kernel: usb.c: registered new driver usb-storage
Oct 25 21:24:54 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1791
Oct 25 21:25:16 maya kernel: usb-uhci.c: interrupt, status 2, frame# 1764
Oct 25 21:25:22 maya kernel: usb-uhci.c: interrupt, status 3, frame# 1676
Oct 25 21:25:28 maya kernel: usb-uhci.c: interrupt, status 3, frame# 1556
....
Oct 25 21:26:23 maya kernel: usb-uhci.c: interrupt, status 2, frame# 716
Oct 25 21:26:24 maya postfix/local[3585]: 28BB21B62B: to=<[EMAIL PROTECTED]>,
relay=local, delay=4, status=sent ("|/usr/bin/procmail")
Oct 25 21:26:29 maya kernel: usb-uhci.c: interrupt, status 3, frame# 620
Oct 25 21:26:35 maya kernel: usb-uhci.c: interrupt, status 2, frame# 524
Oct 25 21:26:41 maya kernel: usb-uhci.c: interrupt, status 2, frame# 428
Oct 25 21:26:47 maya kernel: SCSI disk error : host 1 channel 0 id 0 lun 0 return code
= 70000
Oct 25 21:26:47 maya kernel: I/O error: dev 08:01, sector 7751
Oct 25 21:26:47 maya kernel: usb-uhci.c: interrupt, status 2, frame# 332
Oct 25 21:26:47 maya ntpd[1275]: time reset -0.465056 s
Oct 25 21:26:47 maya ntpd[1275]: synchronisation lost
Oct 25 21:26:52 maya kernel: usb-uhci.c: interrupt, status 2, frame# 236
Oct 25 21:26:58 maya kernel: usb-uhci.c: interrupt, status 2, frame# 148
Oct 25 21:27:04 maya kernel: usb-uhci.c: interrupt, status 2, frame# 52
Oct 25 21:27:11 maya kernel: usb-uhci.c: interrupt, status 2, frame# 2012
Oct 25 21:27:17 maya kernel: SCSI disk error : host 1 channel 0 id 0 lun 0 return code
= 70000
--
Gary Lawrence Murphy - [EMAIL PROTECTED] - TeleDynamics Communications
- blog: http://www.teledyn.com/mt/ - biz: http://teledyn.com/ -
"Computers are useless. They can only give you answers." (Picasso)
