-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Only for info....
...from a Compaq Evo W8000 dual-xeon2G
No more high system-cpu from 20-0.1
now on 20-0.2 I see also something under /proc/acpi (in dmesg 20-0.1 it said that I've
bad bios version...and it bypass acpi activation...)
I dislike that I've /proc/acpi/thermal_zone but not
/proc/acpi/thermal_zone/THRM/temperature (I like monitor temperature...;o) this is
complete /proc/acpi tree:
==========================
ls -R /proc/acpi/
/proc/acpi/:
ac_adapter/ alarm battery/ button/ dsdt embedded_controller/ event fadt fan/
info power_resource/ processor/ sleep thermal_zone/
/proc/acpi/ac_adapter:
/proc/acpi/battery:
/proc/acpi/button:
power/
/proc/acpi/button/power:
PWRF/
/proc/acpi/button/power/PWRF:
info
/proc/acpi/embedded_controller:
/proc/acpi/fan:
/proc/acpi/power_resource:
/proc/acpi/processor:
CPU0/ CPU1/ CPU2/ CPU3/
/proc/acpi/processor/CPU0:
info limit performance power throttling
/proc/acpi/processor/CPU1:
info limit performance power throttling
/proc/acpi/processor/CPU2:
info limit performance power throttling
/proc/acpi/processor/CPU3:
info limit performance power throttling
/proc/acpi/thermal_zone:
#
==========================
Now I look on my laptop...
cu...and good work...;o)
- --
Franco Silvestro
c/o CeSIA - Alma Mater Studiorum - Universita' di Bologna
'lynx -source http://www.reti.unibo.it/FrancoSilvestro.asc | gpg --import'
Key fingerprint = 3145 1309 C5D8 7B3F 2582 44D2 91BB ACAB E010 ABF9
Current Linux uptime: 0 hours 19 minutes.
Linux Version 2.4.20-0.2mdkenterprise, Compiled #1 SMP Thu Nov 21 14:42:53 CET 2002
- -----------------------------------------
Thu Nov 21 20:29:29 CET 2002
- -----------------------------------------
Mandrake Linux Cooker-i586 20021121 18:18
Two 1.98GHzIntelIntel(R) Xeon(TM) CPU 2.00GHz Processors, 1024M RAM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE93Teokbusq+AQq/kRAqYBAJ4iMLpcN+wp4TSgiAxteua1azlFgACeObWN
D1P2hsdULPuimkRwZ5Bx1Z4=
=D4TU
-----END PGP SIGNATURE-----
0
ACPI: RSDT (v001 COMPAQ CPQ0011 08193.04612) @ 0x000e0080
ACPI: FADT (v001 COMPAQ COLUSA 00000.00001) @ 0x000e0130
ACPI: SSDT (v001 COMPAQ CORE_UTL 00000.00001) @ 0x000e16f8
ACPI: SSDT (v001 COMPAQ VILLTBL1 00000.00001) @ 0x000e186c
ACPI: SSDT (v001 COMPAQ DAFFY 00000.00001) @ 0x000e362c
ACPI: MADT (v001 COMPAQ COLUSA 00000.00001) @ 0x000e01a4
ACPI: SSDT (v001 COMPAQ PNP_PRSS 00000.00001) @ 0x000e260f
ACPI: DSDT (v001 COMPAQ DSDT 00000.00001) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Unknown CPU [15:1] APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Processor #6 Unknown CPU [15:1] APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 8
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: auto BOOT_IMAGE=linux-ent ro root=816 devfs=mount hda=ide-scsi
mem=1024M
ide_setup: hda=ide-scsi
Initializing CPU#0
Detected 1977.469 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3945.26 BogoMIPS
Memory: 1032784k/1048576k available (1529k kernel code, 15276k reserved, 521k data,
156k init, 130944k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Xeon(TM) CPU 2.00GHz stepping 02
per-CPU timeslice cutoff: 731.55 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/6 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3945.26 BogoMIPS
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 2.00GHz stepping 02
Total of 2 processors activated (7890.53 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #8 registers: 24.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 1 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1977.3394 MHz.
..... host bus clock speed is 98.8668 MHz.
cpu: 0, clocks: 988668, slice: 329556
CPU0<T0:988656,T1:659088,D:12,S:329556,C:988668>
cpu: 1, clocks: 988668, slice: 329556
CPU1<T0:988656,T1:329536,D:8,S:329556,C:988668>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
ACPI: Subsystem revision 20021115
PCI: PCI BIOS revision 2.10 entry at 0xe8467, last bus=4
PCI: Using configuration type 1
ACPI-0508: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BUS2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BUS2.BUS3._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
IOAPIC[0]: Set PCI routing entry (8-16 -> 0xa9 -> IRQ 16)
00:00:1f[A] -> 8-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (8-17 -> 0xb1 -> IRQ 17)
00:00:1f[B] -> 8-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (8-23 -> 0xb9 -> IRQ 23)
00:00:1f[C] -> 8-23 -> IRQ 23
IOAPIC[0]: Set PCI routing entry (8-19 -> 0xc1 -> IRQ 19)
00:00:1f[D] -> 8-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (8-18 -> 0xc9 -> IRQ 18)
00:01:00[A] -> 8-18 -> IRQ 18
Pin 8-19 already programmed
Pin 8-16 already programmed
Pin 8-18 already programmed
IOAPIC[0]: Set PCI routing entry (8-21 -> 0xd1 -> IRQ 21)
00:04:04[C] -> 8-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (8-22 -> 0xd9 -> IRQ 22)
00:04:04[D] -> 8-22 -> IRQ 22
Pin 8-18 already programmed
Pin 8-21 already programmed
Pin 8-22 already programmed
Pin 8-16 already programmed
Pin 8-21 already programmed
Pin 8-22 already programmed
Pin 8-16 already programmed
Pin 8-18 already programmed
Pin 8-22 already programmed
Pin 8-16 already programmed
Pin 8-18 already programmed
Pin 8-21 already programmed
Pin 8-22 already programmed
Pin 8-16 already programmed
Pin 8-17 already programmed
IOAPIC[0]: Set PCI routing entry (8-20 -> 0xe1 -> IRQ 20)
00:04:06[A] -> 8-20 -> IRQ 20
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
Pin 8-23 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xf0000000, mapped to 0xf8800000, size 65536k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:0ef9
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1280x1024, 45593 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:DMA, hdd:DMA
hda: _NEC CD-RW NR-7800A, ATAPI CD/DVD-ROM drive
hdc: COMPAQ DVD-ROM GD-8000, ATAPI CD/DVD-ROM drive
hdd: Compaq CRD-8484B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
ide-floppy driver 0.99b
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
ide-floppy driver 0.99b
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 194k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
blk: queue f7ad1a18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: COMPAQPC Model: MAN3184MP Rev: 1805
Type: Direct-Access ANSI SCSI revision: 02
blk: queue f7ad1818, I/O limit 4095Mb (mask 0xffffffff)
Vendor: COMPAQPC Model: MAN3735MP Rev: 1805
Type: Direct-Access ANSI SCSI revision: 02
blk: queue f7ad1618, I/O limit 4095Mb (mask 0xffffffff)
Vendor: COMPAQPC Model: MAN3735MP Rev: 1805
Type: Direct-Access ANSI SCSI revision: 02
blk: queue f7ad1218, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
scsi0:A:2:0: Tagged Queuing enabled. Depth 253
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
SCSI device sda: 35566000 512-byte hdwr sectors (18210 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
SCSI device sdb: 142264000 512-byte hdwr sectors (72839 MB)
/dev/scsi/host0/bus0/target1/lun0: p1 p2 < p5 p6 > p3
(scsi0:A:2): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
SCSI device sdc: 142264000 512-byte hdwr sectors (72839 MB)
/dev/scsi/host0/bus0/target2/lun0: p1 p2
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:23:15 Nov 21 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0x2000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0x2020, IRQ 23
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Adding Swap: 1052216k swap-space (priority -1)
scsi2 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: _NEC Model: NR-7800A Rev: 1.27
Type: CD-ROM ANSI SCSI revision: 02
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1, 8 throttling states)
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU3] (supports C1, 8 throttling states)
ACPI: Power Button (FF) [PWRF]
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<[EMAIL PROTECTED]> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:DD:07:7A, IRQ 17.
Board assembly 010829-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
