I apologize if this is the wrong place for the following
I have the SmartLink 5634PCV PCI modem and had to configure it to work.
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8367 [KT266] (rev 0).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0).
IRQ 10.
I/O at 0xd800 [0xd81f].
Bus 0, device 9, function 0:
Communication controller: TOPIC SEMICONDUCTOR Corp TP560 Data/Fax/Voice
56k modem (rev 0).
IRQ 11.
I/O at 0xd400 [0xd407].
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
Master Capable. Latency=32.
I/O at 0xff00 [0xff0f].
Bus 0, device 17, function 4:
USB Controller: VIA Technologies, Inc. UHCI USB (#3) (rev 24).
IRQ 5.
Master Capable. Latency=64.
I/O at 0xcc00 [0xcc1f].
Bus 0, device 17, function 3:
USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 24).
IRQ 5.
Master Capable. Latency=64.
I/O at 0xc800 [0xc81f].
Bus 0, device 17, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 24).
IRQ 5.
Master Capable. Latency=64.
I/O at 0xc400 [0xc41f].
Bus 0, device 17, function 5:
Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio
Controller (rev 16).
IRQ 10.
I/O at 0xd000 [0xd0ff].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x
TMDS (rev 0).
IRQ 11.
Master Capable. Latency=64. Min Gnt=8.
Prefetchable 32 bit memory at 0xd8000000 [0xdbffffff].
I/O at 0x9800 [0x98ff].
Non-prefetchable 32 bit memory at 0xdfefc000 [0xdfefffff].
Even though the modem is detected as TOPIC SEMICONDUTOR, the modem does not
work on install. Getting the modem to work is as simple as
setserial /devtts/0 uart 16550A irq 11 port 0xd400
Can this be used to make the the modem work from install as a true Plug and
Play?
