Stefan van der Eijk <[EMAIL PROTECTED]> writes:
[...] > I've got a number of Ethernet controllers: > > This one works fine with ifplugd: > 00:0c.0 Class 0200: 10b7:9055 (rev 30) > 00:0c.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX > [Cyclone] (rev 30) > Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 > Flags: bus master, medium devsel, latency 32, IRQ 12 > I/O ports at ac00 [size=128] > Memory at da021000 (32-bit, non-prefetchable) [size=128] > Expansion ROM at <unassigned> [disabled] [size=128K] > Capabilities: <available only to root> > > This one doesn't want to come up. It's got a static IP-address and the > interface is brought up after booting. With ifplugd no IP-address is > assigned to the interface. > 00:0d.0 Class 0200: 10b7:9050 > 00:0d.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX > [Boomerang] > Flags: bus master, medium devsel, latency 32, IRQ 11 > I/O ports at b000 [size=64] > Expansion ROM at <unassigned> [disabled] [size=64K] > > This one doesn't want to come up. It's got a dynamic (DHCP) IP-address > and the interface is brought up after booting. With ifplugd no > IP-address is assigned to the interface: > > # ifup eth0 > Determining IP information for eth0... failed; no link present. Check > cable? > > After running dhcpcd by hand all is well. > > 00:0e.0 Class 0200: 1011:0002 (rev 24) > 00:0e.0 Ethernet controller: Digital Equipment Corporation DECchip > 21040 [Tulip] (rev 24) > Flags: bus master, medium devsel, latency 96, IRQ 10 > I/O ports at b400 [size=128] > Memory at da020000 (32-bit, non-prefetchable) [size=128] > > The VMware machine I've got running presents the same issues as the > Tulip card above: > > 00:11.0 Class 0200: 1022:2000 (rev 10) > 00:11.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 > [PCnet32 LANCE] (rev 10) Can you try with initscripts 2mdk ? And if it fails again, can you send me the output of ifstatus -v eth0 ? -- Fred - May the source be with you
